姚方明,马本泰,范怀斌,陆少锋,梁进,任春刚
YAO Fang-ming,MA Ben-tai,FAN Huai-bin,LU Shao-feng,LIANG Jin,REN Chun-gang

• 1:广西新港湾工程有限公司

摘要(Abstract)：

为解决急流水域水下钻孔爆破钻爆船的定位难题，针对当前常用的4锚缆、5锚缆、6锚缆定位系统存在的定位不稳固问题，基于澜沧江四级航道整治建设工程，研究了7锚缆定位技术。应用流体动力学原理，根据不同施工状态，对钻爆船整体和各受力部位进行了受力分析和风荷载、水流力计算。结果表明，以最大风速35 m/s和最大水流速度5.2 m/s进行计算，排水量406 t的钻爆船所受合力在260.0～285.0 kN之间。基于计算结果选择了适当规格的钢丝绳作为主缆，确定了主锚的质量范围，保障了定位的牢固性和安全性。为减少锚机数量和占位空间，研制了平行双滚筒锚机，应用情况表明，1台该锚机可代替2台传统锚机，不仅优化了空间布置，而且操作简便、安全、高效，满足了实际要求。研究成果填补了该领域的技术空白，促进了水下爆破技术水平的提升。
In order to solve the positioning problem of drilling and blasting vessel for underwater drilling and blasting in rapids rivers, the positioning technology of seven anchor cables is studied based on the Lancang River fourth class waterway regulation and construction project, aiming at the positioning instability problem of the current commonly used four anchor cable, five anchor cable and six anchor cable positioning systems. Based on the principle of fluid dynamics, according to different construction conditions, the force analysis, wind load and water flow force calculation of the drilling and blasting vessel as a whole and various stressed parts are carried out. The results show that when the maximum wind speed is 35 m/s and the maximum water flow speed is 5.2 m/s, the combined force of the drilling and blasting vessel with 406 t displacement is 260.0～285.0 kN. Based on the calculation results, the appropriate steel wire rope is selected as the main cable, and the quality range of the main anchor is determined to ensure the firmness and safety of the positioning. In order to reduce the number of windlasses and point space, a parallel double drum windlass is developed. The application shows that one windlass can replace two traditional windlasses, which not only optimizes the space layout, but also is simple, safe and efficient to operate, meeting the actual requirements. The research results fill the technical gap in this field and promote the improvement of underwater blasting technology.

关键词(KeyWords)： 水下爆破;急流;钻爆船;锚机;锚缆;定位技术
underwater blasting;rapids;drilling and blasting vessel;windlass;anchor cable;positioning technology

Abstract:

Keywords:

基金项目(Foundation): 广西科技基地和人才专项基金资助项目(桂科AD20238084);; 防城港重点研发计划基金资助项目(防科AB21014001);; 广西重点研发计划基金资助项目(桂科AB22035001);; 广西交通运输行业重点科技基金资助项目(桂交便函[2022]174号)

作者(Author): 姚方明,马本泰,范怀斌,陆少锋,梁进,任春刚
YAO Fang-ming,MA Ben-tai,FAN Huai-bin,LU Shao-feng,LIANG Jin,REN Chun-gang

DOI: 10.19931/j.EB.20210012

参考文献(References)：

• [1] 喻灿星，覃国杰，曾丽.内河航道水下炸礁钻孔爆破技术研究[J].工程爆破，2021,27(4):58-63.YU C X,QIN G J,ZENG L.Research on technology of underwater reef drilling blasting in an inland waterway.[J].Engineering Blasting,2021,27(4):58-63.
• [2] 赵玉红，赵文达，闫秋实.水下爆炸荷载作用下结构动力响应及损伤破坏[J].工程爆破，2022,28(3):1-10.ZHAO Y H,ZHAO W D,YAN Q S.Structural dynamic response and damage damage under underwater blast load[J].Engineering Blasting,2022,28(3):1-10.
• [3] 刘筹资，查恩尧，欧阳和平，等.水下爆炸气泡运动对水面形态影响的数值模拟[J].工程爆破，2021,27(4):40-50.LIU C Z,ZHA E Y,OUYANG H P,et al.Numerical simulation of the effect of underwater explosive bubble motion on water surface morphology[J].Engineering Blasting,2021,27(4):40-50.
• [4] 赵利平，彭雄，徐亚辉，等.水下爆炸深度对码头框架结构损伤的影响[J].工程爆破，2021,27(1):29-30ZHAO L P,PENG X,XU Y H,et al.Influence of underwater blast depth on the damage of quay frame structure[J].Engineering Blasting,2021,27(1):29-30.
• [5] 胡锦华.水下接触爆炸下钢筋混凝土板毁伤模式探究[J].工程爆破，2022,28(3):17-23.HU J H.Exploration of the destruction mode of reinforced concrete slabs under underwater contact explosion[J].Engineering Blasting,2022,28(3):17-23.
• [6] 韩崇刚，郭成更，王娜峰.基于AUTODYN的乳化炸药水下爆炸能量分布的数值研究[J].工程爆破，2018,24(1):27-31,78.HAN C G,GUO C G,WANG N F.Numerical study of underwater explosion energy distribution of emulsified explosives based on AUTODYN[J].Engineering Blasting,2018,24(1):27-31,78.
• [7] 赵利平，张锋，彭雄，等.水下爆炸冲击下码头结构动力响应的数值模拟[J].工程爆破，2021,27(5):1-8,25.ZHAO L P,ZHANG F,PENG X,et al.Numerical simulation of dynamic response of quay structures under underwater blast impact[J].Engineering Blasting,2021,27(5):1-8,25.
• [8] 刘天云.提高水下钻孔爆破施工船舶定位精度探讨[J].科技资讯，2018(9):84-86.LIU T Y.Discussion on improving the positioning accuracy of underwater drilling and blasting vessels[J].Science & Technology Information,2018(9):84-86.
• [9] 李光辉.山区河流航道急流滩整治水下爆破网路设计分析[J].珠江水运，2012(12):88-89.LI G H.Design and analysis of underwater blasting network for regulation of rapids in mountainous rivers[J].Pearl River Water Transport,2012(12):88-89.
• [10] 李兵，刘桂勇，唐祖晓.内河流域水下钻爆设备改装与钻爆工艺探讨[J].工程爆破，2018,24(4):64-66,90.LI B,LIU G Y,TANG Z X.Discussion on equipment modification and technology of underwater drilling blasting in inland river basin[J].Engineering Blasting,2018,24(4):64-66,90.
• [11] 李红勇，李春军，代显华，等.山区河流水下钻孔爆破施工方法：ZL200910104283.3[P].2009-12-23.LI H Y,LI C J,DAI X H,et al.Construction method of underwater drilling and blasting in mountain rivers:ZL200910104283.3[P].2009-12-23.