陈晓强,张可玉,王志广,刘新明,殷其建
CHEN Xiao-qiang,ZHANG Ke-yu,WANG Zhi-guang,LIU Xin-ming,YIN Qi-jian(Department of Rescue and Salvage

• 1:海军潜艇学院防险救生系

摘要(Abstract)：

叙述了水下爆炸焊接的优点,介绍了国外几个发达国家在水下爆炸焊方面取得的成绩。结合具体的水下爆炸焊试验,指出了水下板与板之间的爆炸焊接时,如果不采取任何排水措施,有间隙的爆炸焊很难实现,无间隙的爆炸焊有成功的可能性;如果使用排水措施,水下爆炸焊的参数设置基本与陆上相同,而且能够成功地焊接两块板材。在水下管与管之间的爆炸焊时,不加排水措施可以实现连接,但如果想提高焊接质量,最好采用排水措施,并使用适当的工艺参数。
The advantages of underwater explosive welding were narrated and the achievements gained by the developed countries were introduced.Based on the experiment of underwater explosive welding,the conclusions were obtained that if drain measures were not taken,the welding with the interval setting between two plates would be very difficult to be achieved and the welding without the interval setting between two plates could be done;if drain measures were taken,the parameters of underwater explosive welding were same to them on land and the two plates could be successfully welded together.When welding two pipes under water,it can be achieved without drain measures.In order to improve the welding quality,it is suggested to take drain measures and choose the proper technological parameters.

关键词(KeyWords)： 水下爆炸焊;爆接质量;排水措施;工艺参数;试验研究
Underwater explosive welding;Welding quality;Drain measure;Technological parameter;Experimentation study

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 陈晓强,张可玉,王志广,刘新明,殷其建
CHEN Xiao-qiang,ZHANG Ke-yu,WANG Zhi-guang,LIU Xin-ming,YIN Qi-jian(Department of Rescue and Salvage

参考文献(References)：

• (1)郑远谋.爆炸焊接和金属复合材料及其工程应用[M].长沙:中南大学出版社,2002.
• (2)邵丙璜,张凯.爆炸焊接原理及其工程应用[M].大连:大连工学院出版社,1987.
• (3)梅福欣,俞尚知.水下焊接与切割译文集[M].北京:机械工业出版社,1982.
• (4)约翰H.尼克松.水下焊接修补技术[M].房晓明,周灿丰,焦向东译.北京:石油工业出版社,2005.
• (5)英国焊接协会.近海设施的水下焊接[M].郭照人译.北京:中国建筑工业出版社,1984.
• (6)Hill T E.Apparatus for Attaching an Underwater Ex-plosive Pad Eye,USA,4552298[P],1985-11-12.
• (7)Sim T,Allen K.Underwater Explosive Welding.USA,4288022[P].1981-9-8.
• (8)Jan Delersj.Method of Underwater Jointing and Repairof Pipelines,USA,4815649[P],1989-3-28.
• (9)陈晓强,张可玉,詹发民,等.线性爆炸焊焊接结合界面的显微分析[J].焊接学报,2008,29(9):105-108.
• (10)陈晓强,张可玉,周方毅,等.爆炸焊接修补工艺试验研究[J].焊接技术,2007,36(6):32-34.