管志强,焦锋
GUAN Zhi-qiang, JIAO Feng(Zhejiang Dachang Blasting Engineering Co.Ltd., Zhoushan, Zhejiang 316000, China)

• 1:浙江大昌爆破工程有限公司
• 2:浙江大昌爆破工程有限公司 浙江舟山316000
• 3:浙江舟山316000

摘要(Abstract)：

根据多年从事深孔爆破设计与审核的经验,认为一份完整的爆破设计应包含六部分内容,即工程概况、方案的选择与论证、技术设计、施工组织设计、安全设计以及附图。文中详细论述了各部分主要内容,推荐了适宜的爆破参数计算公式;同时提出了爆破设计审核的主要项目以及审核中应注意的问题。
It is held from the experience on deep-hole blasting design and its examination that the content of six parts,i.e.engineering general situation,selection and demonstration of scheme,technological design,construction and organization design,safety design and attached drawings,should be included in a complete blasting design.In this paper,main substances of every part were expounded and the suitable formulae for calculation of blasting parameters were put forward.At the same time,main items for examination of blasting design and the problems needing attention were presented.

关键词(KeyWords)： 露天深孔爆破;施工组织;设计编制;设计审核
Deep-hole surface blasting; Construction organization; Design compilation; Design examination

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 管志强,焦锋
GUAN Zhi-qiang, JIAO Feng(Zhejiang Dachang Blasting Engineering Co.Ltd., Zhoushan, Zhejiang 316000, China)

参考文献(References)：

• 〔1〕中国力学学会工程爆破专业委员会 爆破工程(下)[M].北京:冶金工业出版社,1992
• 〔2〕管志强,欧日旭 露天深孔微差爆破在港口工程中的应用[J] 化工矿山技术 1994,23(4):4-6
• 〔3〕钟冬望,林大泽,肖绍清 爆炸安全技术[M] 武汉:武汉工业大学出版社,1992
• 〔4〕林德余,牛京考,马万昌 火钻扩孔爆破[M] 北京:冶金工业出版社,1997