武双章,顾文彬
WU Shuang-zhang,GU Wen-bin

• 1:解放军理工大学野战工程学院

摘要(Abstract)：

为了获得椭圆形罩线型聚能装药射流成型的特点和规律,采用数值模拟的方法对其进行研究。运用正交设计方法和ANSYS/LS-DYNA软件得到了较优的试验方案和射流成型的数值模拟过程,以及射流成型过程的特点、3个典型时刻沿对称面射流速度梯度、射流最大速度和杵体最小速度随时间变化关系。结果表明,相对于常见的楔形罩LSC,椭圆形罩LSC形成的射流较长且均匀,质量相对较大,速度也较高;形成的杵体速度梯度小,横断面外形近似为椭圆形,质量相对较小且集中;射流最小速度位于两翼处而非杵体上。
The characteristics and rules of jet formation of LSC with oval cover were studied by using numerical simulation method.The better project,numerical simulation of jet formation process,and characteristics of jet formation process,and jet velocity gradients along the symmetry plane of three typical times,and variations of the jet max-velocity and pestle minimal velocity with time were achieved by using orthogonal design means and ANSYS/LS-DYNA software.The results showed that the LSC with an oval cover compared with the common LSC with an cuniform cover could produce longer and more symmetrical jet flows with a heavier weight and a quicker speed,and that the slug produced had a smaller velocity gradient whose transect was oval-like and whose weight was relatively smaller and more concentrated,and that the minimal jet velocity was located on the wings instead of the slug.

关键词(KeyWords)： 椭圆形罩;线型聚能装药;射流成型;数值模拟
Oval cover;Linear shaped charge;Jet formation;Numerical simulation

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 武双章,顾文彬
WU Shuang-zhang,GU Wen-bin

参考文献(References)：

• [1]朱生盛,方维凤,刘宏伟,等.LEFP成型及侵彻过程的数值模拟[J].兵工自动化,2011,30(5):76-79.
• [2]武双章,顾文彬,李旭锋.椭圆形罩线型聚能装药结构参数正交优化研究[J].工程爆破,2013,19(3):1-5.
• [3]姚志华,王志军,付璐,等.半正方形罩线型切割器的数值模拟研究[J].爆破器材,2011,40(2):11-13.
• [4]林振荣,季凯,卢玉松,等.线性聚能切割器系统参数实验研究[J].煤炭技术,2010,29(12):176-177.
• [5]李志强,赵隆茂,刘晓明,等.微爆索线型切割某战斗机舱盖的研究[J].航空学报,2008,29(4):1049-1054.
• [6]王尹军,颜事龙,胡坤伦.线性聚能装药的圆形罩和楔形罩之比较[J].煤矿爆破,2001,55(4):3-6.
• [7]Ian A W.Development of the STARS II Shroud Separation System[C]//37th AIAA/ASME/SAE/ASEE Joint Propulsion Conference,2001,2001-3769:1-8.
• [8]李晓杰,江德安,闫鸿浩,等.大型聚能切割器对浅海废弃油井的爆破拆除[J].辽宁工程技术大学学报(自然科学版),2008,27(S1):136-138.
• [9]纪冲,龙源,杨旭,等.线型聚能切割器在工程爆破中的应用研究[J].爆破器材,2004,33(1):32-35.
• [10]刘佩进,何国强,李江,等.用聚能切割法实现推力终止实验研究[J].固体火箭技术,2006,29(2):107-109.
• [11]Dave N,Meryl M.Historical Development of Linear Shaped Charge[C]//43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference&Exhibit,2007,2007-5141:1-12.
• [12]Lien C Y,Lexter J G,Garth E D,et al.Dynamic Testing of Large Scale Destruct Charge Assemblies[C]//42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference&Exhibit,2006,2006-4987:1-16.
• [13]Meryl M,Tom K.Performance Analysis of Linear Shaped Charge for Aerospace Applications[C]//41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference&Exhibit,2005,2005-3839:1-12.
• [14]陈维炎,舒大强,黄玉锋,等.线性聚能装药爆破在水下工程的应用[J].爆破,2006,23(1):88-91.
• [15]Laura J M.Tomahawk Booster Separation System Ground Test Failure Investigation and Results[C]//38th Aerospace Sciences Meeting&Exhibit,2000,2000-0939:1-10.
• [16]罗震,张海军,武庆平.运载器铝头罩分瓣分离性能研究[J].兵工学报,2007,28(4):453-457.
• [17]李立伟,李翔宇.聚能装药圆形切割器的数值模拟和分析设计[J].试验技术与试验机,2006(3):12-14.
• [18]崔云航,万文乾,田七,等.线型聚能装药优化设计[J].火工品,2006(4):42-46.
• [19]Л.П.奥尔连科.爆炸物理学[M].孙承纬,译.北京:科学出版社,2011:922-1079.
• [20]焦丽娟,刘天生.关于楔形罩的初步研究[J].华北工学院学报,2001,22(1):70-73.