张金;沈立晋;
ZHANG Jin~1,SHEN Li-jin~2 (1.Shandong Jinling Iron Mine,Zibo 255000,Shandong,China; 2.China Metallurgical Industry Planning & Research Institute,Beijing 100711,China)

• 1:山东金岭铁矿
• 2:冶金工业规划研究院

摘要(Abstract)：

介绍了军都山隧道开挖施工中所采用的全断面光面爆破快速施工技术。根据隧道围岩硬度大、节理裂隙发育等地质情况,在施工现场进行了掏槽孔不同深度的装药试验,对隧道开挖的爆破参数、炮孔布置、装药结构和起爆网路进行了分析和设计,提出了保证隧道开挖成型质量和提高循环进尺的施工方案与措施,确保了军都山隧道全断面开挖爆破取得圆满成功,可供类似工程参考。
The rapid construction technology(full section smooth blasting) in Jun-Dushan tunnel excavation was presented.According to geological situations such as high hardness surrounding rock and joint fissure development,different depth charge of cutting holes was carried out on the construction field,basting parameters,blast-hole layout,charging structure and priming circuit of tunnel excavation blasting were analyzed and designed in detail.Meanwhile,the construction schemes and measures about guaranteeing tunnel excavation formation quality and enhancing cyclical footage were put forward,which ensured that full section excavation blasting of Jun-Dushan tunnel obtained complete success.The project can provide a reference for similar projects.

关键词(KeyWords)： 全断面;隧道开挖;光面爆破;参数设计;爆破效果
Full section;Tunnel excavation;Smooth blasting;Parameter design;Blasting effect

Abstract:

Keywords:

基金项目(Foundation):

作者(Authors): 张金;沈立晋;
ZHANG Jin~1,SHEN Li-jin~2 (1.Shandong Jinling Iron Mine,Zibo 255000,Shandong,China; 2.China Metallurgical Industry Planning & Research Institute,Beijing 100711,China)

参考文献(References)：

• [1]汪旭光.爆破手册[M].北京:冶金工业出版社,2010.
• [2]皮明华.银洞湾隧道的光面爆破技术[J].中国港湾建设,2003(2):39-41.
• [3]潘明亮,段宝福.大断面隧道光面爆破技术的改进与应用[J].有色金属(矿山部分),2010,63(2):69-72.
• [4]张正宇.中国爆破新技术[M].北京:冶金工业出版社, 2004.
• [5]李彪,张子新.京珠高速公路石门坳隧道开挖中光面爆破效果探讨[J].爆破,2000(2):63-66.
• [6]郭尧,袁甲.光面与预裂爆破对隧道围岩损伤的试验研究[J].工程爆破,2011,17(4):31-35.
• [7]杨云玫,汪金元.浅谈露天开挖中预裂和光面爆破技术的应用条件[J].工程爆破,1996,2(4):17-18.
• [8]费鸿禄,李守巨,何庆志.光面爆破装药不耦合系数的计算[J].爆炸与冲击,1992,12(3):270-274.