薄壳工程弹药聚能射流销毁技术DESTRUCTION TECHNOLOGY OF AMMUNITION WITH THIN SHELL BY SHAPED CHARGE JET
郭方,龙源,郭涛,范勇,孙杰
GUO Fang,LONG Yuan,GUO Tao,FAN Yong,SUN Jie
摘要(Abstract)：
阐述了用聚能装药销毁薄壳工程弹药的设计原则,进行了射流销毁薄壳TNT和薄壳B炸药试验。利用有限元AUTODYN-2D程序对小尺寸聚能射流冲击起爆薄壳装药进行计算,分析了大炸高下对薄壳弹药的作用效果。结果表明,小尺寸聚能射流可以在一定炸高下销毁薄壳弹药但不产生强烈的爆轰或飞散破片。
The design principles of shaped charge used to destroy ammunition with thin shell were described,and experiments of TNT and B explosives with thin shell impacted by shaped charge jet were conducted.Initiation of explosives with thin shell impacted by small size shaped charge jet were calculated by using finite element AUTODYN-2Dprogram,and impact effects of charging with thin shell under high stand-off condition were analyzed.Results showed that the small size shaped charge jet could destroy the explosives with thin shell and without strong detonation or flying fragments under certain stand-off.
关键词(KeyWords)：
聚能射流;冲击起爆;薄壳;销毁;弹药
Shaped charge jet;Shock initiation;Thin shell;Destruction;Ammunition
基金项目(Foundation):
作者(Author):
郭方,龙源,郭涛,范勇,孙杰
GUO Fang,LONG Yuan,GUO Tao,FAN Yong,SUN Jie
参考文献(References)：
- [1]娄建武,龙源,谢兴博.废弃火炸药和常规弹药的处置与销毁技术[M].北京:国防工业出版社,2007:142-210.
- [2]宋桂飞,李成国,夏福君,等.危险弹药销毁用聚能引爆器设计[J].弹箭与制导学报,2010,30(4):99-100,130.
- [3]李金明,丁玉奎,可勇.利用聚能原理销毁危险弹药的试验方法[J].爆破器材,2008,37(3):37-39.
- [4]Held M.Initiation Phenomena with Shaped Charge Jets[C]/Office of Naval Research.Proceedings of 9th International Symposium on Detonation.Portland:Office of Naval Research-Department of the Navy,1989:1416-1424.
- [5]Chick M C,Macintyre I B,Frey R B.The Jet Initiation of Solid Explosives[C]/Naval Surface Weapons Center.Proceedings of 8th International Symposium on Detonation.Albuquerque:Naval Surface Weapons Center,1985:318-329.
- [6]Frey R,Lawrence W,Chick M.Shock Evolution After Shaped Charge Jet Impact and Its Relevance to Explosive Initiation[J].International Journal of Impact Engineering,1995,16(4):563-570.
- [7]张先锋,赵有守,陈惠武.聚能射流引爆带壳炸药数值模拟研究[J].弹箭与制导学报,2005,25(4):165-167.
- [8]汪明星,廖竹良,李裕春,等.聚能射流引爆炸药的数值模拟研究[J].科学技术与工程,2010,10(12):2872-2878.
- [9]冯民贤.射流引爆炸药的判据与机理[J].爆轰波与冲击波,1997,9(3):23-30.
- [10]姜春兰,张宝平.射流引爆炸药的机制及临界判据[J].含能材料,1993,1(2):23-27.
- [11]徐全军,白帆,李裕春,等.微声聚能穿孔装置优化设计及IED安全销毁实验[J].爆炸与冲击,2012,32(1):79-83.
- [12]孙华,王志军,刘强,等.带壳炸药穿而不爆数值模拟与分析[J].火工品,2012(2):40-43.
- [13]章冠人,陈大年.凝聚炸药起爆动力学[M].北京:国防工业出版社,1991:129-154.
- [14]陈刚,陈忠富,陶俊林,等.45钢动态塑性本构参量与验证[J].爆炸与冲击,2005,25(5):451-455.
- [15]胡昌明,贺红亮,胡时胜.45号钢的动态力学性能研究[J].爆炸与冲击,2003,23(2):188-192.