吴岩,倪荣福
Wu Yan Ni Rongfu(Engineering Institute,Engineering Corps,PLA,Nanjing 210007)

• 1:中国人民解放军工程兵工程学院

摘要(Abstract)：

从解决江西丰城电厂取水口水下开槽爆破的实际问题出发，重点研究并在实践中摸索出了在开槽宽度小．爆破深度大并要求一次爆破成型的情况下爆破参数的选择。采用多段微差交错起爆方式及合理的药孔布设，很好地解决了爆破振动对周围的危害，整个工程获得了成功。
The selection of blasting parameters under the condition of narrow width of ditch to becreated,deeper blasting and requirement for once blasting to the bottom,for solving problems in underwater cut blasting of waterfetching ditch of Fengcheng Power Plant,Jiangxi ProvinceThe problem of hazard to the surroundings from blasting seismic shock has been properly solved by using differential and alternative firing method and rational charged blasthole patternThe whole operation was successful,the practice proved its feasibility

关键词(KeyWords)： 水下爆破,沟槽,微差交错起爆
Underwater blasting Ditch Differential and alternative firing method

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 吴岩,倪荣福
Wu Yan Ni Rongfu(Engineering Institute,Engineering Corps,PLA,Nanjing 210007)

参考文献(References)：

• 1陈华腾等．爆破计算手册．沈阳：辽宁科学出版社，1991．2霍永基．水下爆破（上、下）．控制爆破专辑．爆破，1994．3杨传嘉．工程爆破论文选编（全国工程爆破第五届学术会议论文选）．北京：中国地质大学出版社，1993．4陈华腾．水下爆破的几个问题，爆破，1994．