史进伟;罗兴柏;刘国庆;张玉令;
SHI Jin-wei;LUO Xing-bai;LIU Guo-qing;ZHANG Yu-ling;Ordnance Engineering College;

• 1:军械工程学院

摘要(Abstract)：

为了研究间隔介质对聚能射流侵彻间隔靶能力的影响,运用AUTODYN软件分别对射流侵彻水和空气介质间隔靶过程进行数值模拟。主要从侵彻过程中射流形态、间隔介质形态、射流头部速度三个方面出发,对模拟结果进行分析。首先与试验结果进行对比,验证了数值模拟分析的合理性和可靠性。然后通过分析数值模拟结果,得到射流头部速度随侵彻介质距离变化的拟合公式,并得出:射流头部速度在间隔靶水介质中衰减比空气介质中高17.6%,且金属射流速度愈低,相同距离水间隔介质对射流侵彻能力的衰减效果愈明显。
In order to study the influence of space medium on the penetration ability of disconnected target by shaped charge jet,the process of jet penetration the water and air medium disconnected target were simulated respectively by AUTODYN.The simulation results were analyzed mainly from the shape of jet,space medium,and the velocity of top jet in the penetration process.Firstly,compared with the test results,the rationality and reliability of numerical simulation were verified.Then,through the result analysis of simulation,the fitting formula of the velocity variety of top jet with the penetration distance in medium was obtained.The attenuation of top jet velocity in water was 17.6% higher than in air disconnected target.The lower velocity of jet,the more obviously was the velocity attenuation of jet with the same distance in water.

关键词(KeyWords)： 聚能射流;间隔靶;间隔介质;侵彻;数值模拟
Shaped charge jet;Disconnected target;Space medium;Penetration;Numerical simulation

Abstract:

Keywords:

基金项目(Foundation): 国防重点预研项目

作者(Authors): 史进伟;罗兴柏;刘国庆;张玉令;
SHI Jin-wei;LUO Xing-bai;LIU Guo-qing;ZHANG Yu-ling;Ordnance Engineering College;

参考文献(References)：

• 〔1〕郭婷婷,任会兰,宁建国.陶瓷靶抗射流侵彻的理论模型及数值模拟[J].固体力学学报,2011,32(S1):259-264.GUO Ting-ting,REN Hui-lan,NING Jian-guo.Theoretical Model and Numerical Simulation of Ceramic Target Against Shaped-charge Jet Penetration[J].Chinese Journal of Solid Mechanics,2011,32(S1):259-264.
• 〔2〕贾鑫,黄正祥,祖旭东,等.聚能装药垂直侵彻橡胶复合装甲的变形研究[J].工程力学,2013,30(2):451-457.JIA Xin,HUANG Zheng-xiang,ZU Xu-dong,et al.Research on Deformation of Rubber Composite Armor Against Shaped Charge Vertical Penetration[J].Engineering Mechanics,2013,30(2):451-457.
• 〔3〕祖旭东,黄正祥,顾晓辉.聚乙烯橡胶抗射流侵彻数值仿真研究[J].系统仿真学报,2010,22(1):56-64.ZU Xu-dong,HUANG Zheng-xiang,GU Xiao-hui.Simulation Analysis on Ploy-Rubber Resisted Jet Penetrating[J].Journal of System Simulation,2010,22(1):56-64.
• 〔4〕ZHANG Xiang-rong,WU Cheng,HUANG Feng-lei.Penetration of Shaped Charge Jets With Tungsten-Copper and Copper Liners at the Same Explosive-to-liner Mass Ratio Into Water[J].Shock Waves,2010(20):263-267.
• 〔5〕XING Shi-long,HUANG Xiang-ke.Simulation Study on High-powered Shaped Charge Warhead Penetrating into Target With Water Layer[J].Applied Mechanics and Materials,2014(532):342-345.
• 〔6〕MAX P,Development of Techniques For Investigation Energy Contributions to Target Deformation and Penetration During Reactive Projectile Hypervelocity Impact[D].California:Naval Postgraduate School,2011.
• 〔7〕吕愿宏,王续跃,李晓杰,等.粉末药型罩石油射孔弹侵彻性能的数值模拟[J].工程爆破,2015,21(2):1-4.LV Yuan-hong,WANG Xu-yue,LI Xiao-jie,et al.The Numerical Simulation on Penetrating Performance of Powdered Liner in Perforation of Oil[J].Engineering Blasting,2015,21(2):1-4.