刘维柱,方向,汪庆桃,高振儒,赵全军
LIU Wei-zhu,FANG Xiang,WANG Qing-tao ,GAO Zhen-ru,ZHAO Quan-jun (Engineering Institute of Engineering Corps,PLAUST , Nanjing 210007, China)

• 1:解放军理工大学工程兵工程学院
• 2:解放军理工大学工程兵工程学院
• 3:解放军理工大学工程兵工程学院
• 4:解放军理工大学工程兵工程学院

摘要(Abstract)：

用AUTODYN -2D计算软件对线型聚能装药切割钢板的过程进行了数值模拟 ,分析了射流形成过程中各种参数的分布规律 ,并对射流切割钢板的宽度、厚度等进行了预测。模拟计算与实物试验结果的相对误差为 10 6%～ 11 9% ,是在工程上允许的范围内。这说明 ,数值模拟方法可用于聚能装药的优化设计和切割其他材料的研究
The full process of cutting steel slab by a linear shaped charge is numerically simulated using AUTODYN-2D code The distribution of varied parameters in the formation of metallic particle jet is analyzed, and width and depth of cuts in the steel slab are forecasted The errors of numerical simulation relative to actual test results are 10 6 ～11 9% that is permissible to normal engineering It is indicated that the numerical simulation is possible to be used for optimization of shaped charge design and research of other material cutting

关键词(KeyWords)： 数值模拟;聚能装药;切割爆破;射流
Numerical simulation; Shaped charge;Cutting blasting; Jet

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 刘维柱,方向,汪庆桃,高振儒,赵全军
LIU Wei-zhu,FANG Xiang,WANG Qing-tao ,GAO Zhen-ru,ZHAO Quan-jun (Engineering Institute of Engineering Corps,PLAUST , Nanjing 210007, China)

参考文献(References)：

• 〔1〕恽寿榕,涂侯杰.爆炸力学计算方法[M].北京:北京理工大学出版社,1995.
• 〔2〕隋树元,王树山.终点效应学 [M].北京:国防工业出版社,2000.
• 〔3〕HORNEM ANNU,HOLZWA RTHA.ShapedChargePenetrationinAluminaTargets[J].IntJImpactEngng,1997,20(2):375-386.
• 〔4〕温万治,恽寿榕,赵衡阳,等.欧拉程序中描述分界面的网格线示踪点法(MOCL)[J].兵工学报,1999,20(3):212-216.
• 〔5〕温万治,恽寿榕,赵衡阳,张月琴.聚能装药侵彻钢板全过程的数值模拟[J].爆炸与冲击,2001,21(2):126-130.