闫永富;王文才;赵永岗;
YAN Yong-fu;WANG Wen-cai;ZHAO Yong-gang;School of Mining and Coal Engineering, Inner Mongolia University of Science and Technology;Baotou Steel Union Co., Ltd.;Baiyun Iron Mine of Baotou Steel Group Company;

• 1:内蒙古科技大学矿业与煤炭学院
• 2:包钢钢联股份有限公司
• 3:包钢集团公司白云铁矿

摘要(Abstract)：

为了解决露天矿在靠帮过程中由于地质原因或者人为原因造成的预留靠帮作业空间狭窄,而无法使用常规预裂技术进行控制靠帮的问题,设计采用一种导向孔诱导成缝技术。即利用间隔装药技术对爆破能量释放进行调控的优点和导向孔爆破技术对爆破裂缝扩展方向控制的特点,实现狭窄区域的控制靠帮爆破。目前该技术成功地应用在了白云鄂博西矿的二次境界优化工程中,并且取得了良好的靠帮控制爆破效果。
In order to solve the problem that the conventional pre-splitting technology cannot be used in the final slope control of open-pit mining due to the reserved narrow working space, which is caused by geological or man-made reasons during the leaning process of the open-pit mine, the guide hole inducing seam technology is designed. The slope control of narrow areas by blasting is realized by utilizing the advantages of interval charge technology controlling the release of blasting energy and the pilot hole blasting technology controlling the expansion direction of blasting cracks. At present, this technology has been successfully applied in the secondary boundary optimization process of Bayunebo West Mine, which achieved a good result for slope control by blasting.

关键词(KeyWords)： 露天矿;最终边帮;导向孔;间隔装药
open pit mine;final slope;guide hole;interval charging

Abstract:

Keywords:

基金项目(Foundation): 包钢(集团)公司白云鄂博铁矿资助项目(SA010020190903B001)

作者(Authors): 闫永富;王文才;赵永岗;
YAN Yong-fu;WANG Wen-cai;ZHAO Yong-gang;School of Mining and Coal Engineering, Inner Mongolia University of Science and Technology;Baotou Steel Union Co., Ltd.;Baiyun Iron Mine of Baotou Steel Group Company;

DOI: 10.19931/j.EB.20200148

参考文献(References)：

• [1] 刘占全，王德胜，崔凤，等.巴润矿24 m高台阶爆破技术实验研究[J].金属矿山，2019(6):68-71.LIU Z Q ,WANG D S,CUI F,et al.Experimental research on the 24 m high bench blasting technique in barun mine[J].Metal Mine,2019(6):68-71.
• [2] 尤元元，崔正荣，闫永富，等.气体间隔器在边坡控制爆破中的试验与应用[J].现代矿业.2019,35(5):120-122.YOU Y Y,CUI Z R,YAN Y F,et al.Test and application of gas spacer in slope controlled blasting [J].Modern Mining,2019,35(5):120-122.
• [3] 马瑞成，程鹏，乔海平，等.提升软硬互层岩体松动爆破综合效能的精准设计[J].煤炭工程，2019,51(11):10-13.MA R C,CHENG P,QIAO H P,et al.Precise design for improving comprehensive efficiency of loose blasting in soft-hard interbedded rock mass[J].Coal Engineering,2019,51(11):10-13.
• [4] 陈勇，郝胜鹏，陈延涛，等.带有导向孔的浅孔爆破在留巷切顶卸压中的应用[J].采矿与安全工程学报，2019,32(2):253-259.CHEN Y,HAO S P,CHEN Y T,et al.Study on the application of short-hole blasting with guide hole to roof cutting pressure relief of gob-side entry retainingt[J].Journal of Mining & Safety Engineering,2019,32(2):253-259.
• [5] 魏炯，朱万成，魏晨慧，等.导向孔对两爆破孔间成缝过程影响的数值模拟[J].工程力学，2013,30(5):335-339.WEI J,ZHU W C,WEI C H,et al.Numerical simulation on contribution of guide-hole to crack coalescence of two boreholes [J].Engineering Mechanics,2013,30(5):335-339.
• [6] 廖文旺.爆生气体作用下裂隙岩体裂纹扩展模式研究[D].长春：吉林大学，2019.LIAO W W.Study on crack propagation model of fractured rock mass under the action of detonation gas[D].Changchun:Jilin University,2019.
• [7] 王海东.深部开采低渗透煤层预裂控制爆破增透机理研究[D].哈尔滨：中国地震局工程力学研究所，2012.WANG H D.Study on permeability enhancement mechanism of presplitting controlled blasting in deep mining low permeability coal seam[D].Harbin:Institute of Engineering Mechanics,CSB,2012.
• [8] 汪旭光.爆破设计与施工[M].北京：冶金工业出版社，2012:248-257.WANG X G.Blasting design and execution[M].Beijing:Metallurgical Industry Press,2012:248-257.
• [9] 刘丽梅，夏建才.多孔粒状铵油炸药爆炸热化学计算与分析[J].工程爆破，2012,18(2):89-92.LIU L M,XIA J C.Thermochemical calculation and analysis for the explosion of porous granular anfo explosive[J].Engineering Blasting,2012,18(2):89-92.
• [10] 喻灿星，覃国杰，曾丽.内河航道水下炸礁钻孔爆破技术研究[J].工程爆破，2021,27(4):58-63.YU C X,TAN G J,ZENG L.Research on technology of underwater reef drilling blasting in an inland waterway[J].Engineering Blasting,2021,27(4):58-63.
• [11] 刘康，郭东明，张英实，等.爆炸载荷下邻近巷道围岩裂纹贯穿过程研究[J].爆破，2019,36(2):26-32.LIU K,GUO D M,ZHANG Y S,et al.Study on crack penetration process of surrounding rock of adjacent roadway under blast loading[J].Blasting,2019,36(2):26-32.