贺浩锋;王志军;韩泽;李昊;
HE Hao-feng;WANG Zhi-jun;HAN Ze;LI Hao;College of Mechatronic Engineering, North University of China;Unit 32752 of the PLA;

• 1:中北大学机电工程学院
• 2:中国人民解放军32752部队

摘要(Abstract)：

为了研究截顶辅助药型罩的结构参数对椭球罩射流成型及侵彻性能的影响，运用仿真软件Autodyn-2D的Euler算法对其有限元模型进行数值模拟计算。结果表明：当辅助药型罩高度为2.5 mm,直径为15 mm时，截顶椭球罩形成的杆式射流具有最优的形态及侵彻性能，使用优化后的辅助药型罩结构侵彻混凝土靶板时，头部速度提升23.9%,射流长度提升15.9%,侵彻深度提升14.1%。研究结果可为椭球罩形成聚能射流研究提供参考。
In order to study the influence of the structural parameters of the truncated auxiliary shaped charge liner on the jet forming and penetration performance of the ellipsoid liner, the finite element model was simulated by the Euler algorithm of the simulation software Autodyn-2 D. The results show that when the height of the auxiliary shaped charge liner is 2.5 mm and the diameter is 15 mm, the formed jet has the best shaped penetration performance. When the optimized auxiliary shaped charge liner structure is used to penetrate the concrete target, the head velocity increased by 23.9%, the jet length 15.9%, and the penetration depth 14.1%. The research results can provide a reference for the research on the formation of shaped jet by the ellipsoid liner.

关键词(KeyWords)： 截顶辅助药型罩;椭球罩;射流成型;Euler;数值模拟
truncated auxiliary;ellipsoid liner;formation of jet;Euler;numerical simulation

Abstract:

Keywords:

基金项目(Foundation): 山西省研究生教育创新基金资助项目(2020SY341)

作者(Authors): 贺浩锋;王志军;韩泽;李昊;
HE Hao-feng;WANG Zhi-jun;HAN Ze;LI Hao;College of Mechatronic Engineering, North University of China;Unit 32752 of the PLA;

DOI: 10.19931/j.EB.20210008

参考文献(References)：

• [1] 高靖.一种新型聚能装药数值模拟与实验研究[D].太原：中北大学，2011.GAO J.Research on the numerical simulation of a new shaped charge[D].Taiyuan:North University of China,2011.
• [2] 赵重阳.一种新型动能弹侵彻钢筋混泥土数值模拟[D].太原：中北大学，2013.ZHAO C Y.Numerical simulation of a new kinetic energy projectile penetration of reinforced concrete[D].Taiyuan:North University of China,2013.
• [3] 王志军，尹建平.弹药学[M].北京：北京理工大学出版社，2017.WANG Z J,YIN J P.Ammunition theory[M].Beijing:Beijing Institute of Technology Press,2017.
• [4] 徐斌，王成，徐文龙.高速杆式射流形成的数值模拟与实验研究[J].北京理工大学学报，2018,38(4):331-337.XU B,WANG C,XU W L.Numerical simulation and experiment investigation on hypervelocity jetting projectile charge formation[J].Transactions of Beiing Institute of Technology,2018,38(4):331-337.
• [5] 张小静，吴国东，王志军，等.圆筒形辅助结构对半球罩射流成型影响的研究[J].火炮发射与控制学报，2020,41(1):7-12.ZHANG X J,WU G D,WANG Z J,et al.A study of the influence of cylindrical auxiliary structure on the jet forming of hemispherical hood[J].Journal of Gun Launch And Control,2020,41(1):7-12.
• [6] 孙加肖，尹建平，王志军，等.双层椭圆形药型罩装药射流成形时长短轴比、铝铜铁三种材料的声阻抗和罩间距三因素正交设计研究[J].兵器装备工程学报，2016,37(6):135-139.SUN J X,YIN J P,WANG Z J,et al.Study on orthogonal design of the axial ratio,the acoustic impedance of aluminum,bronze and iron and the space between covers forming double oval hollow linear jet stream[J].Journal of Ordnance Equipment Engineering,2016,37(6):135-139.
• [7] BAKER E L,DANIELS A S,TURCI J P,et al.Selectable initiation shaped charges C I Proceedings of the 20th International Symposium on Ballistics[C]// Orlando,Florida:s.n.2002:589-596.
• [8] 王海福，江增荣，俞为民，等.杆式射流装药水下作用行为研究[J].北京理工大学学报，2006(3):189-192.WANG H F,JIANG Z R,YU W M,et al.Behavior of jetting penetrator charge operating underwater[J].Transactions of Beiing Institute of Technology,2006(3):189-192.
• [9] 袁利东.一种并联杆式射流侵彻混凝土数值模拟研究[D].太原：中北大学，2016.YUAN L D.Numerical simulation of a parallel rod-shaped warhead penetrating concrete[D].Taiyuan:North University of China,2016.
• [10] 陈莉，王志军，尹建平.材料对截顶辅助药型罩形成聚能侵彻体的影响[J].兵器装备工程学报，2016,37(7):20-22,27.CHEN L,WANG Z J,YIN J P.Effect of material on additional body of a trunconical liner shaping shaped charge penetrator[J].Journal of Ordnance Equipment Engineering,2016,37(7):20-22,27.
• [11] RIEDEL W,THOMA K,HIERMAIER S,et al.Penetration of reinforced concrete by BETA-B-500:numerical analysis using a new macroscopic concrete model for hydrocodes [C] // Proceedings of the Ninth International Symposiumon on Interaction of the Effects of Munitions with Structures.Berlin,Germany:ISIEMS,1999:315-322.