黎蜀明;樊荆连;
LI Shu-ming;FAN Jing-lian;Shenzhen Huahai Blasting Engineering Co., Ltd.;

• 1:深圳市华海爆破工程有限公司

摘要(Abstract)：

为了判断拆除爆破高耸建筑物能否倾倒,以设置坐标系的方法,通过几何关系求得建筑物倾斜时的重心位置和侧面轮廓线各拐点的坐标值,再用计算公式求出侧面面积,最后用面积矩法求出重心位置。将相关计算式和参数输入Excel表,可以便捷地对建筑物倾倒的可靠性作出判断。
In order to judge whether a high-rise building can be dumped by demolition blasting, the position of the center of gravity when the building is inclined can be obtained by setting coordinate system and the coordinate values of each inflection point of the side contour line, then the side area is calculated by using the calculation formula, and finally the position of the center of gravity is obtained by using the area moment method. By inputting the above related formulas and parameters into Excel table, the reliability of building dumping can be judged conveniently.

关键词(KeyWords)： 拆除爆破;建筑物倾倒验算;Excel计算判断;重心;面积矩
demolition blasting;checking calculation of building dumping;Excel computational judgement;gravity;area moment

Abstract:

Keywords:

基金项目(Foundation):

作者(Authors): 黎蜀明;樊荆连;
LI Shu-ming;FAN Jing-lian;Shenzhen Huahai Blasting Engineering Co., Ltd.;

参考文献(References)：

• [1] 周凤仪,朱金华,邱进芬.楼房爆破切口高度设计探讨[J].采矿技术,2007(3):92-93.ZHOU F Y,ZHU J H,QIU J F.Discussion on design of blasting incision height of building[J].Mining Technology,2007(3):92-93.
• [2] 申荣光,蒋华林,杨英明.建(构)筑物拆除爆破切口高度理论分析[J].中国科枝信息,2015(21):25-27.SHEN R G,JIANG H L,YANG Y M.Theoretical analysis of blasting cut height in demolition of buildings[J].China Science and Technology Information,2015(21):25-27.
• [3] 邓学才.怎样确定构件的重心位置[J] .建筑工人,2000(10):16-17.DENG X C.How to determine the center of gravity of components[J].Builders' Monthly,2000(10):16-17.