新型环形切割器成型仿真及影响因素灰关联分析NEW TYPE ANNULAR CUTTER FORMATION SIMULATION AND GREY RELATION ANALYSIS ON ITS INFLUENCE FACTORS
吴国东;贾伟;米强;王志军;
WU Guo-dong1,JIA Wei1,2,MI Qiang3,WANG Zhi-jun1 (1.School of Mechatronic Engineering,North University of China Taiyuan 030051,China; 2.No.66352 Troops of PLA,Beijing 101508,China;3.No.73021 Troops of PLA, Hangzhou 310023,China)
摘要(Abstract):
提出一种截面呈弧锥结合形状的变壁厚环形药型罩结构,应用非线性有限元软件完成了爆炸载荷下弧锥结合罩形成环形切割器的数值模拟。对16种不同参数组合下的环形切割器成型情况进行了仿真,并基于灰色理论对各影响因素进行了灰关联分析。结果表明,合理调节药型罩壁厚能有效地降低内外罩径向速度差,获得竖直向下的环形EFP;影响环形切割器侵彻性能的最主要因素是圆弧曲率半径和锥角。
An annular liner whose thickness was variational and whose cross section was arc-cone shape was proposed.The non-linear finite element software was used to complete the numerical simulation of the arc-cone liner forming annular cutter under explosion loading.The formations for annular cutters on 16 kinds of arc-cone lines with different parameters were simulated by the non-linear finite element software,grey relation analysis for different factors was conducted by grey theory.The result showed that radial velocity difference between inner and outer walls of the liner could be reduced through reasonable adjustment its thickness and the designed liner was able to form annular EFP with vertical downward direction.The prime factors which influenced the penetration performance of annular cutters were curvature radius and cone angle.
关键词(KeyWords):
环形切割器;弧锥结合罩;变壁厚;数值模拟;灰关联分析
Annular cutter;Arc-cone liner;Variational thickness;Numerical simulation;Grey relation analysis
基金项目(Foundation):
作者(Authors):
吴国东;贾伟;米强;王志军;
WU Guo-dong1,JIA Wei1,2,MI Qiang3,WANG Zhi-jun1 (1.School of Mechatronic Engineering,North University of China Taiyuan 030051,China; 2.No.66352 Troops of PLA,Beijing 101508,China;3.No.73021 Troops of PLA, Hangzhou 310023,China)
参考文献(References):
- (1)吴成,曾艳春,张向荣,等.环形聚能药型罩的设计新方法与实验[J].北京理工大学学报,2007,27(4):291-294.
- (2)王成,恽寿榕,黄风雷.W形聚能装药射流形成及侵彻的实验和数值仿真研究[J].兵工学报,2003,24(4):451-454.
- (3)李鹏飞,肖川,王利侠.环形EFP的形成和侵彻效应[J].火炸药学报,2008,31(3):6-9.
- (4)时党勇,李裕春,张胜民.基于ANSYS/LS-DYNA8.1进行显式动力分析[M].北京:清华大学出版社,2005.
- (5)刘思峰,谢乃明.灰色系统理论及其应用[M].北京:科学出版社,2008.
- (6)邓聚龙.灰理论基础[M].武汉:华中科技大学出版社,2002.
- 环形切割器
- 弧锥结合罩
- 变壁厚
- 数值模拟
- 灰关联分析
Annular cutter - Arc-cone liner
- Variational thickness
- Numerical simulation
- Grey relation analysis
- 吴国东
- 贾伟
- 米强
- 王志军
WU Guo-dong1- JIA Wei1
- 2
- MI Qiang3
- WANG Zhi-jun1 (1.School of Mechatronic Engineering
- North University of China Taiyuan 030051
- China
- 2.No.66352 Troops of PLA
- Beijing 101508
- China
- 3.No.73021 Troops of PLA
- Hangzhou 310023
- China)
- 吴国东
- 贾伟
- 米强
- 王志军
WU Guo-dong1- JIA Wei1
- 2
- MI Qiang3
- WANG Zhi-jun1 (1.School of Mechatronic Engineering
- North University of China Taiyuan 030051
- China
- 2.No.66352 Troops of PLA
- Beijing 101508
- China
- 3.No.73021 Troops of PLA
- Hangzhou 310023
- China)