爆破成井装药结构与中心孔药量的模拟与实践Simulation and practice of charge structure and center hole charge quantity of raise-forming blasting
费鸿禄;包士杰;
FEI Hong-lu;BAO Shi-jie;Institute of Engineering Blasting,Liaoning Technical University;
摘要(Abstract):
为研究小断面急倾斜天井采用VCR法一次爆破成井的中心孔药量问题,采用ANSYS/LS-DYNA对成井过程进行了数值模拟。根据C·W利文斯顿球状药包理论,采用5孔布置、单孔中心掏槽、同分层中心孔与边孔不等高装药模拟成井过程。通过观察爆炸作用下岩石塑性应变场的变化,确定该方法能够很好地解决岩石夹制性问题。进而,改变中心孔药量进行多组模拟,发现不同中心孔药量与井壁上不同位置的单元应力对岩石抗拉强度的二阶矩的值呈非线性关系,并由此总结出中心孔药量的确定方法。工程实例验证了采用不等高装药与使用合理的药量能够达到理想的成井效果。
In order to study the center hole charge quantity of VCR(Vertical Crater Retreat)method of sharp inclined raise blasting with a small section,ANSYS/LS-DYNA software was used to simulate the raise-forming process.According to the theory of C·W Livingston's spherical charge,5-holes arrangement,single-hole center cutting,differ-height charge of the same stratification center hole and side holes were used to simulate the raise-forming process.By observing the plastic strain field of the rock under the action of the explosion,the method was determined to be used to solve the rock clamping problem.Many simulations were conducted by changing the center hole charge quantity.It showed that different center hole charge quantity and the stress of element at different location on the borehole wall had nonlinear relationship with the second moment of the tensile strength of the rock.Therefore the method of determining the center hole charge quantity was summarized.Engineering examples proved that the use of differ-height charge and reasonable charge quantity could achieve ideal raise-forming effect.
关键词(KeyWords):
天井;爆破成井;装药结构;VCR法;岩石夹制性;中心孔药量;数值模拟
raise;raise-forming blasting;charge structure;Vertical Crater Retreat method;rock clamping;center holes charge quantity;numerical simulation
基金项目(Foundation):
作者(Authors):
费鸿禄;包士杰;
FEI Hong-lu;BAO Shi-jie;Institute of Engineering Blasting,Liaoning Technical University;
参考文献(References):
- [1]晏廷玺.影响地下中深孔爆破效果的主要因素[J].金属矿山,2009(S1):460-462.YAN T X.Main factor of affecting the underground medium-length hole dynamiting effect[J].Metal Mine,2009(S1):460-462.
- [2]徐敏.中深孔爆破一次成井技术研究及应用[D].长沙:中南大学,2012.XU M.Research and application of blasting to form a shaft by one step with medium-length hole[D].Changsha:Central South University,2012.
- [3]曲艳东,孙从煌,章文姣,等.深孔间隔装药爆破对不同孔壁介质的影响[J].工程爆破,2016,22(3):6-14.QU Y D,SUN C H,ZHANG W J,et al.Effect of decking on different hole-wall media in deep-hole blasting[J].Engineeing Blasting,2016,22(3):6-14.
- [4]宗琦,刘菁华.煤矿岩石巷道中深孔爆破掏槽技术应用研究[J].爆破,2010,27(4):35-39.ZONG Q,LIU J H.Application research on cutting technology of mid-deep hole blasting in coal mine rock tunnel[J].Blasting,2010,27(4):35-39.
- [5]姚道春,汪令辉.冬瓜山铜矿采场大直径束状深孔爆破数值模拟[J].金属矿山,2012(4):12-15.YAO D C,WANG L H.Numerical simulation on largediameter bunch deephole blasting in dongguashan copper mine[J].Metal Mine,2012(4):12-15.
- [6]KOU S O,RUSTAN A.Burden related to blasthole diameter in rock blasting[J].Int.J.Roek Mech.Sci.and Geomech,1992(6):543-553.
- [7]李金跃.深孔群孔球状药包爆破一次成井技术与应用研究[D].长沙:中南大学,2014.LI J Y.Research and application of simultaneous shaft sinking by multiple deep holes blasting with sphirecal charge[D].Changsha:Central South University,2014.
- [8]张云鹏,武旭,朱晓玺.露天台阶深孔爆破合理超深数值模拟分析[J].工程爆破,2015,21(1):1-4.ZHANG Y P,WU X,ZHU X X.Numerical simulation analysis of reasonable subdrilling on the open-air bench blasting[J].Engineeing Blasting,2015,21(1):1-4.
- [9]宋锦泉.乳化炸药爆轰特性研究[D].北京:北京科技大学,2000.SONG J Q.Research on detonation characteristic of emulsion explosives[D].Beijing:University of Science&Technology Beijing,2000.
- [10]徐易.VCR法快速掘进天井数值模拟及应用研究[D].阜新:辽宁工程技术大学,2015.XU Y.Research on numerical simulation and application of VCR method for fast driving[D].Fuxin:Liaoning Technical University,2015.
- [11]黄治成.采场外廓控制爆破技术研究及应用[D].长沙:中南大学,2011.HUANG Z C.Research and application of stope outside controlling blasting technique[D].Changsha:Central South University,2011.
- [12]费鸿禄,张立国,付天光,等.爆破理论及其应用[M].北京:煤炭工业出版社,2008:191-195.FEI H L,ZHANG L G,FU T G,et al.The blasting theory and application[M].Beijing:Coal Industry Press,2008:191-195.
- [13]戴俊.柱状装药爆破的岩石压碎圈与裂隙圈计算[J].辽宁工程技术大学学报(自然科学版),2001,20(2):144-147.DAI J.Calculation of radii of the broken and cracked areas in rock by a long charge explosion[J].Journal of Liaoning Technical University(Natural Science),2001,20(2):144-147.
- [14]张奇.岩石爆破的粉碎区及其空腔膨胀[J].爆炸与冲击,1990,10(1):68-75.ZHANG Q.Smash districts and expanding of cavities in rock blasting[J].Explosion and Shock Waves,1990,10(1):68-75.
- 天井
- 爆破成井
- 装药结构
- VCR法
- 岩石夹制性
- 中心孔药量
- 数值模拟
raise - raise-forming blasting
- charge structure
- Vertical Crater Retreat method
- rock clamping
- center holes charge quantity
- numerical simulation