夏志成;张建亮;王曦浩;姚新;周竞洋;
XIA Zhi-cheng;ZHANG Jian-liang;WANG Xi-hao;YAO Xin;ZHOU Jing-yang;PLA University of Science and Technology;Troop 92302 PLA;The General Staff Corps of Engineers Research Third Institute;

• 1:解放军理工大学国防工程学院
• 2:中国人民解放军92302部队
• 3:总参工程兵科研三所

摘要(Abstract)：

研究防爆墙的防护效应,使其更为有效地降低爆炸冲击波对目标的破坏作用,设计了钢板夹聚氨酯和钢板夹混凝土两种防爆墙。利用一维应力波理论分析比较了两种防爆墙的防护能力,借助ANSYS/LS-DYNA软件讨论了不同墙高、爆距及测距对防爆墙防护效应的影响。研究表明:钢板夹芯的防爆墙芯材刚度越小,防护效应越好,且芯材会影响高压区形成的位置;防护率与墙后测点并无明显的数学关系,但各点防护率都围绕某一固定值上下波动,且该固定值随墙高的增加而增大;防护率(均值)随着墙高的增加而增大,且增幅也随之增大;防护率(均值)随爆距的增大而均匀减小,且减小的幅度与墙高呈负相关。
Studying the protective effect of the explosion proof wall to make it more effective to reduce the target damage of explosion shock wave,two kinds of explosion proof walls that polyurethane explosion proof wall and concretes explosion proof wall were designed.The protection ability of two explosion proof walls were compared by one dimensional wave impedance theory.The protection effect of the explosion proof walls with different height,blasting distance and measurement distance were researched through ANSYS/LS-DYNA software.The research result showed that,the protective effect was better when the stiffness of core material was decreased,the core material would affect the forming location of high pressure zone.There was no obvious math relationship between the protection rate and the measuring point,but the protection rate of each point fluctuated around a fixed value,the fixed value increased with the wall height raised.The protection rate increased with wall height raised and the amplification also increased.The protection rate(mean)decreased with blast distance increased,and the amplification had negative correlation of the amplitude of reduced with the wall height.

关键词(KeyWords)： 钢板夹芯;防爆墙;绕流;防护效应;聚氨酯;混凝土
Steel plate sandwich;Explosion proof wall;Flow around;Protective effect;Polyurethane;Concrete

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金资助项目(51478469)

作者(Authors): 夏志成;张建亮;王曦浩;姚新;周竞洋;
XIA Zhi-cheng;ZHANG Jian-liang;WANG Xi-hao;YAO Xin;ZHOU Jing-yang;PLA University of Science and Technology;Troop 92302 PLA;The General Staff Corps of Engineers Research Third Institute;

参考文献(References)：

• [1]HINCKLEY W M,YANG J C S.Analysis of rigid polyurethane foam as a shock mitigator[J].Exp.Mech.,1975,15(5):177-183.
• [2]SHUTTLEWORTH R W.Open-cell polyurethane foams comparison of static and dynamic compression properties[J].J.Appl.Polymer.Sci.,1985,30(1):333-345.
• [3]SHERWOOD J A,FROST C C.Constitutive modeling and simulation of energy absorbing polyurethane foam under impact loading[J].Polymer Engineering and Science,1992,32(16):1 138-1 146.
• [4]任志刚,楼梦麟,田志敏.聚氨酯泡沫复合夹层板抗爆特性分析[J].同济大学学报,2003,31(1):6-10.REN Zhi-gang,LOU Meng-lin,TIAN Zhi-min.Analysis of antidetonational property of sandwich panel of polyurethane foam[J].Journal of Tongji University,2003,31(1):6-10.
• [5]丁娜娜,严东晋,徐源.悬臂式防爆墙消波作用数值分析及应用[J].地下空间与工程学报,2010,6(3):645-649.DING Na-na,YAN Dong-jin,XU Yuan.Numerical analysis and application of shielding effect of cantilever blast wall[J].Chinese Journal of Underground Space and Engineering,2010,6(3):645-649.
• [6]何涛,杨竞,金鑫,等.ANSYS10.0/LS-DYNA非线性有限元分析实例指导教程[M].北京:机械工业出版社,2007.HE Tao,YANG Jing,JIN Xin,et al.ANSYS10.0/LS-DYNA finite element analysis example refers tutorial guide[M].Beijing:China Machine Press,2007.
• [7]朱立新.挡波墙对空气冲击波的削波作用研究[J].爆破,2003,20(1):78-80.ZHU Li-xin.The cut effect of a gear wave wall on air shock wave[J].Blasting,2003,20(1):78-80.
• [8]吴开腾.挡墙对爆炸形成的空气冲击波防护效应的三维数值模拟研究[J].内江师范学院学报,2003,18(2):5-11.WU Kai-teng.3D numerical simulation of protective effect of the wall on explosive shock wave[J].Journal of Neijiang Teachers College,2003,18(2):5-11.
• [9]北京工业学院八系编写组.爆炸及其作用[M].北京:国防工业出版社,1979.Eight Department of Beijing Institute of Industry Group.Explosion and its effect[M].Beijing:National Defence Industry Press,1979.
• [10]白金泽.LS-DYNA3D理论基础与实例分析[M].北京:科学出版社,2005:52-58.BAI Jin-ze.Theoretical basis and case analysis of LS-DYNA3D[M].Beijing:Science Press,2005:52-58.