肖雪,黄志平,肖开文,张国全,巫纯辉,林泽梅
XIAO Xue1,HUANG Zhi-ping2,XIAO Kai-wen2,ZHANG Guo-quan1,2,WU Chun-hui2

• 1:武汉工业学院机械工程系
• 2:梅州振声机械设备研究所
• 3:合肥通用机械研究院

摘要(Abstract)：

基于对民爆器材行业生产技术的现状分析,提出了制约中包药卷包装技术发展的瓶颈——中包药卷码夹技术。在介绍了码夹的对象和其结构组成的基础上,探讨了药卷变形机理,即引起药卷变形的几个因素,包括作用力与作用的距离、储料仓中药量的控制、料槽通道宽度的尺寸、药卷与料槽通道间的摩擦阻力、药卷间的挤压及药卷下落过程中产生的倾斜,并给出了解决办法;最后建立了码夹效率的优化模型。
Status analysis of manufacturing technology of industrial explosive showed that the technology of explosive cartridge stacking was the bottleneck restricting the development of mid-package packing technology.The present paper,based on the introduction of stacking′s object and its structure,discussed in detail the distortional mechanism of explosive cartridge in terms of several factors of causing the distortion,including acting force and its range,the amount control in store hopper,the dimension of channel,the frictional resistance between cartridge and channel,the squeeze between cartridges and the incline during the falling.The paper also discussed the solutions to the problems and established an optimized model of the algorithm for efficiency of stacking device.

关键词(KeyWords)： 工业炸药药卷;中包;码夹装置;故障机理;码夹效率;优化模型
Industrial explosive cartridge;Mid-package;Cartridge stacking device;Fault mechanism;Stacking efficiency;Optimized model

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 肖雪,黄志平,肖开文,张国全,巫纯辉,林泽梅
XIAO Xue1,HUANG Zhi-ping2,XIAO Kai-wen2,ZHANG Guo-quan1,2,WU Chun-hui2

参考文献(References)：

• (1)张国全,梅文清,董结,等.民爆中包包装与装箱全自动生产线方案设计[J].轻工机械,2006,24(4):161-164.
• (2)吴义忠,龚云波,张国全.民爆中包包装与装箱全自动生产线关键技术的研究[J].包装工程,2007,28(8):81-84.
• (3)杨明刚.小药卷炸药中包自动整列码垛工艺技术[J].爆破器材,2006,72(1):24-26.
• (4)王德军,张志银,胡能钦.提高乳化炸药硬度的途径[J].爆破器材,1999,28(5):5-10.