宋桂飞;李成国;夏福君;王韶光;肖东胜;
SONG Gui-fei,LI Cheng-guo,XIA Fu-jun,WANG Shao-guang,XIAO Dong-sheng(Ordnance Technology Institute,Ordnance Engineering College,Shijiazhuang 050000,China)

• 1:军械工程学院军械技术研究所

摘要(Abstract)：

根据待销毁弹药壁厚较大的特点,经分析论证,选用了特制的聚能引爆器对其进行炸毁。本文对聚能射流销毁大壁厚弹药的可行性进行了分析,并做了现场试验。销毁试验证明,利用聚能射流可以有效地销毁大壁厚弹药。
According to the character of thick-shell ammunition under disposal,the purpose-made shaped charge detonator was finally used after comparisons of some disposal programs.The feasibility of destroying thick-shell ammunition by the shaped charge jet was introduced.Ammunition disposal tests were done and approved that it was effective to use the shaped charge detonator in thick-shell ammunitions disposal.

关键词(KeyWords)： 聚能射流;大壁厚弹药;销毁
Shaped charge jet;Thick-shell ammunition;Disposal

Abstract:

Keywords:

基金项目(Foundation): 军队科研计划项目[2006]装司字第254号

作者(Authors): 宋桂飞;李成国;夏福君;王韶光;肖东胜;
SONG Gui-fei,LI Cheng-guo,XIA Fu-jun,WANG Shao-guang,XIAO Dong-sheng(Ordnance Technology Institute,Ordnance Engineering College,Shijiazhuang 050000,China)

参考文献(References)：

• (1)总装备部通用装备保障部.《报废通用弹药处理技术》[M].北京:解放军出版社,2004,81-84.
• (2)葛勇,付天光,杨智广,等.聚能切割销毁废旧炮弹[J].工程爆破,2006,12(4):74-76.
• (3)任新见,李林,汪剑辉.一种销毁哑弹的聚能射流设计[J].爆破,2008,25(4):82-84.
• (4)史秀志,李山存,陆广,等.聚能药包爆破切割大型铜块体的工程实践[J].工程爆破,2006,12(4):47-49.