孙飞;周向阳;蒋新忠;李广洲;唐毅;刘迪;
SUN Fei;ZHOU Xiang-yang;JIANG Xin-zhong;LI Guang-zhou;TANG Yi;LIU Di;NO.272 Geological Party of Nuclear Industry;Nanjing Public Security Bureau;

• 1:江苏省核工业二七二地质大队
• 2:南京市公安局

摘要(Abstract)：

以一座120m高钢结构烟囱爆破拆除工程为研究背景,为获得该工程中所用线型聚能切割器较优的结构参数组合,采用正交优化设计的方法,研究了线型聚能切割器罩顶角2α、母线长dm、罩壁厚δ和炸高H四个主要因素对聚能射流的影响,选取L27(313)正交优化表,以射流侵彻钢板最大深度Yi作为评判指标,利用LS-DYNA有限元分析软件进行数值计算,得到4个因素对评判指标Yi影响的主次顺序,获得了最佳的结构参数组合:罩顶角2α取90°、母线长dm取25mm、罩壁厚δ取1.0mm、炸高H取10mm。将优化后的线型聚能切割器应用于实际工程中,效果良好,符合工程要求。
Taking a 120 mhigh steel structure chimney blasting demolition project as the research background,in order to obtain the optimal combination of the linear shape energy cutter used in the project,the orthogonal optimization design method was used to study the effect of the linear shaped energy cutter.L27(313)orthogonality optimization table was adopted and the maximum depth Yiof the steel plate penetrated by the jet was taken as the index of judging.The effects of four factors including the apex angle 2α,the length dm,the wall thicknessδand the charge height H on shaped charge jet were selected to analyze.The LS-DYNA finite element analysis software was used to calculate the parameters.The sequence of effect of these four factors on Yi was obtained.The optimal combination of structure parameters was that 2αequals to 90°,dmequaled to 25 mm,δwas 1.0mm and H was 10 mm.The optimized linear shaped energy cutter was applied to the actual project and the result was good,which met the engineering requirements.

关键词(KeyWords)： 钢结构烟囱;线型聚能切割器;拆除爆破;数值模拟;正交设计
Steel chimney;Linear shaped charge cutter;Demolition blasting;Numerical simulation;Orthogonal design

Abstract:

Keywords:

基金项目(Foundation):

作者(Authors): 孙飞;周向阳;蒋新忠;李广洲;唐毅;刘迪;
SUN Fei;ZHOU Xiang-yang;JIANG Xin-zhong;LI Guang-zhou;TANG Yi;LIU Di;NO.272 Geological Party of Nuclear Industry;Nanjing Public Security Bureau;

参考文献(References)：

• [1]孙飞,龙源,纪冲,等.120m超高塔架式钢结构烟囱定向爆破拆除[J].工程爆破,2016,22(2):65-69.SUN Fei,LONG Yuan,JI Chong,et al.Demolition of a 120m-high tower steel chimney by directional blasting[J].Engineering Blasting,2016,22(2):65-69.
• [2]纪冲,龙源,杨旭,等.线型聚能切割器在工程爆破中的应用研究[J].爆破器材,2004,33(1):32-35.JI Chong,LONG Yuan,YANG Xu,et al.Study on application of linear shaped charge cutters in engineering blasting[J].Explosive Materials,2004,33(1):32-35.
• [3]吴鸿雁.聚能切割在钢结构建筑拆除中的应用研究[J].合肥师范学院学报,2010,28(3):58-60.WU Hong-yan.Research on application of shaped charged cutting to demolition of steel-structured building[J].Journal of Hefei Normal University,2010,28(3):58-60.
• [4]贺五一,龙源,谭雪刚,等.线型聚能切割技术爆破拆除高耸筒形钢结构物[J].爆破,2005,22(4):92-96.HE Wu-yi,LONG Yuan,TAN Xue-gang,et al.Blasting demolition of tower tubular steel structures by linear shaped charge cutter[J].Blasting,2005,22(4):92-96.
• [5]何洋扬,龙源,贺五一,等.线型聚能切割器在塔状钢质构筑物爆破拆除工程中的应用研究[J].爆破器材,2005,34(3):25-28.HE Yang-yang,LONG Yuan,HE Wu-yi,et al.Research on application of linear shaped charged cutters in tower formed steel building′s tore down engineering blasting[J].Explosive Materials,2005,34(3):25-28.
• [6]李磊.基于正交试验的多面聚能效应的数值模拟与应用研究[D].合肥:中国科学技术大学,2013:44-63.LI Lei.Numerical simulation and application of multidimensional shaped charge effect based on orthogonal experimental method[D].Hefei:University of Science and Technology of China,2013:44-63.
• [7]张凯,李晓杰.聚能线型切割器最佳张开角的理论分析[J].爆炸与冲击,1988,8(4):316-322.ZHANG Kai,LI Xiao-jie.Theoretical analysis of the optimal opening angle of an explosive cutter[J].Explosion and Shock Waves,1988,8(4):316-322.
• [8]夏卫国,李裕春,顾文彬,等.线型聚能射流形成过程的数值模拟[J].火工品,2003(4):24-27.XIA Wei-guo,LI Yu-chun,GU Wen-bin,et al.Numerical simulation of linear shaped charge jet formation process[J].Initiators&Pyrotechnics,2003(4):24-27.
• [9]崔云航,李裕春,吴腾芳,等.线型聚能装药数值模拟与优化设计[J].爆破,2005,22(3):26-29.CUI Yun-hang,LI Yu-chun,WU Teng-fang,et al.Numerical simulation and optimization design of linear shaped charge[J].Blasting,2005,22(3):26-29.
• [10]王飞,王连来,刘广初.线性切割器正交优化设计与数值模拟研究[J].爆破器材,2006,35(2):23-26.WANG Fei,WANG Lian-lai,LIU Guang-chu.Orthogonal optimization designation and numerical simulation of linear shaped shaped charge[J].Explosive Materials,2006,35(2):23-26.
• [11]马海洋,龙源,何洋扬.炸高对线型聚能切割器切割深度影响的数值分析[J].火工品,2008(4):28-33.MA Hai-yang,LONG Yuan,HE Yang-yang.Numerical analysis on effects of burst height on penetration depth of LSCC[J].Initiators&Pyrotechnics,2008(4):28-33.
• [12]唐献述,王树民,翟国锋.金属型材线型聚能爆炸切割试验与数值模拟研究[J].井冈山大学学报(自然科学版),2013,34(6):66-71.TANG Xian-shu,WANG Shu-min,ZHAI Guo-feng.Experimental and numerical simulating study on the capacity of the linear shaped charge cutting the shape steel[J].Journal of Jinggangshan University(Natural Science),2013,34(6):66-71.