胡磊;任高峰;任少峰;李晓虎;宋华;
HU Lei;REN Gao-feng;REN Shao-feng;LI Xiao-hu;SONG Hua;School of Resources and Environmental Engineering,Wuhan University of Technology;Jiaojia Gold Mine,Shandong Gold Mining Industry Co.,Ltd.;Gezhouba Explosive Co.,Ltd.;

• 1:武汉理工大学资源与环境工程学院
• 2:山东黄金矿业(莱州)有限公司焦家金矿
• 3:葛洲坝易普力股份有限公司

摘要(Abstract)：

为找出页岩的最佳钻孔角度,考虑到页岩的节理特征,借鉴凿碎比功法的原理设计实验,比较在同等做功条件下,不同钻孔角度的凿孔净深。实验结果表明,页岩的钻孔效率随钻孔角度的增大而提高。通过筛分实验比较分析了不同钻孔角度下钻凿出的岩屑的粒径分布特征,对页岩的钻孔效率与钻孔角度之间的关系进行了验证。
To find out the best drilling angle of shale,a series of experiments had been carried out con- sidering joint characteristics of the shale and using the principle of specific chiseling work for reference,and then net depths of holes with different drilling angles under the condition of the same work had been compared.The results showed that the drilling efficiency had been enhanced with the increase of the drill- ing angle.Furthermore,distribution characteristics of the particle size of drilling cuts under different drill- ing angles had been compared and analyzed through sieve tests,and the relationship between shale drilling efficiency and drilling angle had been verified.

关键词(KeyWords)： 页岩;可钻性;凿碎比功;钻孔角度;筛分实验
Shale;Drillability;Specific chiseling work;Drilling angle;Sieve test

Abstract:

Keywords:

基金项目(Foundation): 国家“十二五”科技支撑计划重点项目(2011BAB05B03);; 国家自然科学基金项目(51104112)

作者(Authors): 胡磊;任高峰;任少峰;李晓虎;宋华;
HU Lei;REN Gao-feng;REN Shao-feng;LI Xiao-hu;SONG Hua;School of Resources and Environmental Engineering,Wuhan University of Technology;Jiaojia Gold Mine,Shandong Gold Mining Industry Co.,Ltd.;Gezhouba Explosive Co.,Ltd.;

参考文献(References)：

• [1]付利攀,张一敏,刘涛,等.酸碱性添加剂对硅质含钒页岩焙烧效果的影响[J].金属矿山,2012(1):111-114.
• [2]修宪民,杨弘.岩石力学性质及可钻性分级研究[J].云南地质,2001,20(3):323-330.
• [3]郑德帅,高德利,冯江鹏.实钻条件下井底岩石可钻性预测模型研究[J].岩土力学,2012,33(3):859-863.
• [4]渠爱巧.鞍千矿矿岩特性与可钻性研究[D].沈阳:东北大学,2008.
• [5]邹德永,曹继飞,袁军,等.碳酸盐岩地层抗钻特性预测方法研究及应用[J].岩石力学与工程学报,2011(S2):3851-3856.
• [6]张愈祖,陈寿如,于子庆,等.矿岩可凿可爆性与其物理力学性质相关性的研究[J].工程爆破,2004,10(2):1-4.
• [7]龙涛,余斌,胡建军.宜春钽铌矿凿岩爆破参数优化研究及应用[J].工程爆破,2009,15(3):43-45.
• [8]史晓亮,段隆臣,王蕾,等.微钻法进行岩石可钻性分级[J].金刚石与磨料磨具工程,2002(3):32-34.
• [9]陈寿如,谢圣权,李雁翎,等.特殊矿体的物理力学性质及其可凿性可爆性试验研究[J].中南大学学报(自然科学版),2004,35(4):667-670.
• [10]潘起峰,高德利.用声波法评价地层可钻性各向异性的实验研究[J].岩石力学与工程学报,2006,25(1):162-167.
• [11]李夕兵.凿岩爆破工程[M].长沙:中南大学出版社,2011.
• [12]杨年华,薛里,孟海利,等.精准控制钻孔角度的定向装置研究[J].工程爆破,2011,17(1):39-42.