刘秀明;王耀华;
LIU Xiu-ming~1,WANG Yao-hua~2 (1.Research institute,Yongkang machinery Co.,Ltd.,Yixing 214206,Jiangsu,China; 2.PLA University of science and technology,Nanjing 210007,China)

• 1:江苏永康机械有限公司科研所
• 2:解放军理工大学

摘要(Abstract)：

简要介绍了某种爆炸切割的特殊需要,论证了研究柔性聚能切割索弯曲性能的作用与意义;归纳出其弯曲形式,分析了弯曲破坏的模式及其危害效应;论述了影响许用弯曲度的静态和动态参数,定性地给出了许用弯曲度的判据。
Some special application of explosive cutting were briefly introduced,the function and significance of the study on bending property of lithe linear shaped charge were demonstrated.The bending forms were summed up,harmful effects and damage models resulted from the bending were analyzed,the static and dynamic parameters which affected the permitted bending degree were discussed,the criterion of the permitted bending degree was qualitatively put forward.

关键词(KeyWords)： 柔性聚能切割索;许用弯曲度;弯曲破坏模式;危害效应
Lithe linear shaped charge;Permitted bending degree;Bending damage model;Harmful effect

Abstract:

Keywords:

基金项目(Foundation):

作者(Authors): 刘秀明;王耀华;
LIU Xiu-ming~1,WANG Yao-hua~2 (1.Research institute,Yongkang machinery Co.,Ltd.,Yixing 214206,Jiangsu,China; 2.PLA University of science and technology,Nanjing 210007,China)

参考文献(References)：

• [1]蒋耀港,沈兆武.柔性线型聚能切割器的应用研究[J]. ??含能材料,2011,19(4):454-458.
• [2]林振荣,季凯.线性聚能切割器系统参数实验研究[J].煤炭技术,2010,29(12):176-178.
• [3]李建平,白春花.实用线型切割器研究[J].爆破器材, 2005,34(4):33-35.
• [4]王淑玲,苟瑞君.线型聚能装药切割钢板过程的数值模拟[J].机械管理开发,2008(3):72-76.
• [5]林加剑,沈兆武.线性聚能切割器切割钢索的试验研究及数值模拟[J].工程爆破,2008,14(4):1-4.
• [6]易建坤,姜新权.起爆方式对线性聚能装药射流形成的影响[J].火炸药学报,2006,29(3):57-61.