易建坤;吴腾芳;夏卫国;
YI Jian-kun,WU Teng-fang,XIA Weiguo(Engineering Institute of Engineer Corps,PLA University of Sci.& Tech.,Nanjing 210007,China)

• 1:解放军理工大学工程兵工程学院
• 2:解放军理工大学工程兵工程学院
• 3:解放军理工大学工程兵工程学院 南京210007
• 4:南京210007

摘要(Abstract)：

以工程中常用的柔性切割器为研究对象,在不考虑端部效应的前提下对三种起爆方式下线性成型装药射流形成差异进行了理论和数值模拟分析,得出了不同起爆方式下射流头部速度的大小关系、射流内部速度的分布规律。在此基础上进一步提出了三种起爆方式下线性成型装药切割目标的恰当的数值模拟方法。
The flexible blasting cutter applied widely in blasting engineering is chosen as the object of this research.No considering the effect of the free end of linear shaped charge,theoretic analysis and numerical simulation analysis on the difference of jet formation of linear shaped charge with three different ways of detonation have proceeded.The magnitude of velocity of jet head and the grads of velocity from jet head to jet rear of linear shaped charge with three ways of detonation are gained.On the base of above research results,suitable numerical simulation methods for the cutting process of linear shaped charge with three different ways of detonation are brought forward.

关键词(KeyWords)： 起爆方式;线性成型装药;射流;数值模拟
Detonation way;Linear shaped charge;Jet;Numerical simulation

Abstract:

Keywords:

基金项目(Foundation):

作者(Authors): 易建坤;吴腾芳;夏卫国;
YI Jian-kun,WU Teng-fang,XIA Weiguo(Engineering Institute of Engineer Corps,PLA University of Sci.& Tech.,Nanjing 210007,China)

参考文献(References)：

• (1)中国兵器工业二○四研究所,燃烧爆破工程公司.柔性切割索使用说明书[R].2001.
• (2)Defourneaux M.V型装药切割的基础理论[R].国外科技资料(弹箭类),1974.
• (3)Defourneaux M.空心装药与射流侵彻的流体动力学理论[R].国外科技资料(弹箭类),1974.
• (4)曾新吾,薛鸿陆.线型聚能装药的理论研究[J].爆炸与冲击,1988,8(2):316-322.
• (5)LIVERMORE SOFTWARE TECHNOLOGY CORPORA-TION.LS-DYNA970 KEYWORD USER’S MANUAL[R].April,2003.
• (6)沃尔特斯W P,朱卡斯Q I.成型装药原理及其应用[M].王树魁,贝静芬等译.北京:兵器工业出版社,1992.