杨玉银;陈长贵;陈斌;张健鹏;黄勇;蔺敬军;刘志辉;
YANG Yu-yin;CHEN Chang-gui;CHEN Bin;ZHANG Jian-peng;HUANG Yong;LIN Jing-jun;LIU Zhi-hui;Sinohydro Bureau 5 Co.,Ltd.;

• 1:中国水利水电第五工程局有限公司

摘要(Abstract)：

为了解决乌干达卡鲁玛尾水隧洞底板开挖的石方超挖问题,在底板开挖的初始阶段,进行了一系列光面爆破装药结构改进技术实验,通过调整底板光爆孔孔距、抵抗线、线装药密度,最终确定了合理的底板开挖光面爆破参数:孔距61.8cm,最小抵抗线60cm,装药间隔61.3cm,线装药密度160.4g/m。实验结果表明:光面爆破装药结构改进技术同样适用于隧洞底板开挖,底板光爆孔内按一定间距分布的炸药卷和导爆索在处于自由状态的情况下,仍然能够正常起爆。在卡鲁玛尾水隧洞底板开挖的光面爆破施工中,底板开挖半孔率达90%以上,底板总平均超挖16.67cm,大大减少了石方超挖量,节省了大量回填混凝土,有效降低了开挖成本。
In order to reduce the overbreak in the tunnel floor excavation in Uganda Karuma HPP TRT Project,a series of trial smooth blasting with technical improvement of charging were conducted in the preliminary stage of tunnel floor excavation.The reasonable smooth blasting parameters were achieved by adjusting the blasthole spacing,burden and charging density.The blasthole spacing was 61.8cm,burden was 60 cm and charging density was 160.4g/m.It indicated that charging in smooth blasting with the technical improvement was applicable to the tunnel floor excavation,and the explosive and detonator installed with certain spacing in the blasthole could normally initiate without the fastening.With the smooth blasting in the tunnel floor excavation in Uganda Karuma HPP TRT Project,the half-hole rate reached more than 90% and the average tunnel floor overbreak was controlled within 16.67 cm,which has reduced the overbreak and saved a lot of filling concrete to effectively reduce the cost of excavation.

关键词(KeyWords)： 底板开挖;超挖控制;光面爆破;光爆参数;爆破实验;隧洞
floor excavation;overbreak control;smooth blasting;smooth blasting parameter;blasting test;tunnel

Abstract:

Keywords:

基金项目(Foundation):

作者(Authors): 杨玉银;陈长贵;陈斌;张健鹏;黄勇;蔺敬军;刘志辉;
YANG Yu-yin;CHEN Chang-gui;CHEN Bin;ZHANG Jian-peng;HUANG Yong;LIN Jing-jun;LIU Zhi-hui;Sinohydro Bureau 5 Co.,Ltd.;

参考文献(References)：

• [1]中国水利水电第十四工程局有限公司.水工建筑物地下开挖工程施工技术规范DL/T5099-2011[S].北京:中国电力出版社,2011.Sinohydro Bureau 14 Co.,Ltd.Technical specification for excavation underground works on hydraulic structures DL/T5099-2011[S].Beijing:China Power Press,2011.
• [2]杨玉银,陈长贵,黄浩,等.隧洞开挖光面爆破装药结构的改进与应用[J].工程爆破,2016,22(4):77-81.YANG Y Y,CHEN C G,HUANG H,et al.The improvement and application of smooth blasting charging structure in the tunnel excavation[J].Engineering Blasting,2016,22(4):77-81.
• [3]中华人民共和国工业和信息部.工业导爆索GB/T 9786-2015[S].北京:中国标准出版社,2015.Ministry of Industry and Information Technology of the People's Republic China.Common detonating cord GB/T9786-2015[S].Beijing:China Standards Press,2015.
• [4]汪旭光.爆破设计与施工[M].北京:冶金工业出版社,2011:322,360-363.WANG X G.Blasting design and construction[M].Beijing:Metallurgical Industry Press,2011:322,360-363.
• [5]马洪琪,周宇,和孙文.中国水利水电地下工程施工[M].北京:中国水利水电出版社,2011:196-198.MA H Q,ZHOU Y,HE S W.Construction of underground hydro works in china(first volume)[M].Beijing:China Water Power Press,2011:196-198.
• [6]杨玉银.隧洞开挖光面爆破新技术[C]//汪旭光.工程爆破文集(全国工程爆破学术会议论文集第七辑).乌鲁木齐:新疆青少年出版社,2001:302-307.YANG Y Y.A new technique of tunnel excavation by smooth blasting with interval charging[C]//WANG X G.Collection of engineering blasting(National engineering blasting academic conference collection 7).Wulumuqi:Xinjiang Youth Press,2001:302-307.
• [7]杨玉银,蒋斌,刘春,等.隧洞开挖爆破超挖控制技术研究[J].工程爆破,2013,19(4):21-24.YANG Y Y,JIANG B,LIU C,et al.Research on overbreak control technology of blasting for tunnel excavation[J].Engineering Blasting,2013,19(4):21-24.