周春华;谭业发;蔡立艮;方虎生;宴俊伟;
ZHOU Chun-hua,TAN Ye-fa,CAI Li-gen,FANG Hu-sheng,YAN Jun-wei(Engineering Institute of Engineering Corps,PLA Univ.of Sci.& Tech.,Nanjing 210007,China)

• 1:中国人民解放军理工大学工程兵工程学院

摘要(Abstract)：

介绍了爆炸焊接的基本原理和特点,得到了不等厚度布药能够得到质量较高的微波状结合的结论。分析了装备抢修的特点和要求,并在此基础上阐述了爆炸焊接方法在装备抢修中的应用情况和下一步需要做的工作。
The rationale and features of explosive welding were discussed and the fact that high bonding quality of explosive welding was obtained by unequal thickness dynamite distribution.The paper,based on analysis of characteristic and requirements of equipment rush-repairing,discussed the practical application status and proposed the work that should be done in next stages.

关键词(KeyWords)： 爆炸焊接;界面波;装备抢修
Explosive welding;Interface wave;Equipment rush-repairing

Abstract:

Keywords:

基金项目(Foundation):

作者(Authors): 周春华;谭业发;蔡立艮;方虎生;宴俊伟;
ZHOU Chun-hua,TAN Ye-fa,CAI Li-gen,FANG Hu-sheng,YAN Jun-wei(Engineering Institute of Engineering Corps,PLA Univ.of Sci.& Tech.,Nanjing 210007,China)

参考文献(References)：

• [1]李传梁.装备的战场抢修[J].四川兵工学报,2008,29(4):102-127.
• [2]史长根,李子全,王耀华,等.爆炸焊接2#岩石铵锑炸药不稳定爆轰段界面结合质量研究[J].爆破器材,2005,34(6):5-7.
• [3]郑哲敏,杨振声.爆炸加工[M].北京:国防工业出版社,1981.
• [4]郑远谋.爆炸焊接和金属复合材料及其工程应用[M].长沙:中南大学出版社,2002.
• [5]郑远谋.爆炸焊接和爆炸焊接复合材料[J].焊接技术,2007,36(6):1-5.
• [6]田涛,陆明,刘鹏,等.爆炸焊接在装备维修中的应用研究[J].张家口职业技术学院学报,2008,21(1):65-67.
• [7]刘玉廷.战场抢修面临的挑战和机遇[J].航空工程与维修,2000,21(4):19-21.