张超逸;武飞;丁言鑫;周岳;刘云;
ZHANG Chao-yi;WU Fei;DING Yan-xin;ZHOU Yue;LIU Yun;North Blasting Technology Co., Ltd.;Shanxi Jiangyang Engineering Blasting Co., Ltd.;Xinjiang Jiangyang Engineering Demolition Construction Co., Ltd.;

• 1:北方爆破科技有限公司
• 2:山西江阳工程爆破有限公司
• 3:新疆江阳工程爆破拆迁建设有限公司

摘要(Abstract)：

为研究多排减振孔的减振机理,基于单一减振孔对应力波传播产生的干扰作用,将多排减振孔视为应力连续位移不连续结构面模型。以P波为主要研究对象,根据P波经过多排减振孔后的衰减公式,对影响透射波强度的因素进行分析。通过ANSYS/LS-DYNA对P波在有无减振带的条件下的传播情况进行数值模拟,对比分析两组数值模拟中P波的传播过程以及波阵面情况。研究结果表明:在入射波与岩石介质条件相同的情况下,多排减振孔的减振率随应力波入射角度减小而减小;虽然应力波经过多排减振孔后会产生减振效果,但随着应力波传播距离增加,应力波恢复稳定传播,此时减振孔丧失减振作用。
In order to study the vibration damping mechanism of multi-row vibration damping holes, based on the stress wave disturbance of the single-row vibration damping hole, the multi-row vibration damping holes were regarded as a model with continuous stress and discontinuous displacement. Taking the P wave as the main research object, according to the attenuation formula of the P wave after passing through multi-row vibration damping holes, the factors affecting the intensity of transmission waves were analyzed. Numerical simulations of the propagation of the P wave with or without the damping band were carried out, and the propagation processes and the wave surfaces in the two numerical simulations were compared and analyzed.The results show that the vibration damping rate of multi-row vibration damping holes decreases as the incident angle of the stress wave decreases under the same conditions of incident wave and rock medium. Although the vibration damping effect could be obtained after the stress wave passes through multi-row vibration damping holes, the stress wave resumes stable propagation with the increase of the propagation distance, and then the vibration damping holes lose its effect at this time.

关键词(KeyWords)： 减振孔;应力波;爆破振动;数值模拟
vibration damping holes;stress wave;blasting vibration;numerical simulation

Abstract:

Keywords:

基金项目(Foundation):

作者(Authors): 张超逸;武飞;丁言鑫;周岳;刘云;
ZHANG Chao-yi;WU Fei;DING Yan-xin;ZHOU Yue;LIU Yun;North Blasting Technology Co., Ltd.;Shanxi Jiangyang Engineering Blasting Co., Ltd.;Xinjiang Jiangyang Engineering Demolition Construction Co., Ltd.;

DOI: 10.19931/j.EB.20200025

参考文献(References)：

• [1] 杜世通.地震波动力学[M].东营：中国石油大学出版社，1996:357-500.DU S T.Seismic wave dynamics[M].Dongying:China University of Petroleum Press,1996:357-500.
• [2] 宋林.节理岩体中应力波传播的动力特性研究[D].西安：西安建筑科技大学，2012.SONG L.Study on the dynamic characteristics of stress wave propagation in jointed rock mass[D].Xi'an:Xi'an University of Architecture and Technology,2012.
• [3] 高启栋，卢文波，杨招伟，等.垂直孔爆破诱发地震波的成分构成及演化规律[J].岩石力学与工程学报，2019,38(1):18-27.GAO Q D,LU W B,YANG Z W,et al.Components and evolution laws induced by vertical-hole blasting[J].Chinese Journal of Rock Mechanics and Engineering,2019,38(1):18-27.
• [4] 杨典光.减震孔对爆破地震的隔振效果研究[D].长沙：长沙理工大学，2015.YANG D G.Study on vibration isolation effect of shock absorption hole on blasting earthquake[D].Changsha:Changsha University of Science and Technology,2015.
• [5] 俞缙，宋博学，钱七虎.含单组节理的双重非线性弹性岩石介质中的P波传播规律[J].岩石力学与工程学报，2012,31(12):2 400-2 411.YU J,SONG B X,QIAN Q H.Study of propagation of P-waves in dual nonlinearelastic rock medium with one set of joints[J].Chinese Journal of Rock Mechanics and Engineering,2012,31(12):2 400-2 411.
• [6] 黎罡.工程爆破中减震孔的隔震机理与效果研究[D].长沙：长沙理工大学，2014.LI G,Study on isolation mechanism and effect of shock absorption hole in engineering blasting[D].Changsha:Changsha University of Science and Technology,2014.
• [7] 杨善元.岩石爆破动力学基础[M].北京：煤炭工业出版社，1993:137-175.YANG S Y.Foundation of rock blasting dynamics[M].Beijing:China Coal Industry Publishing Home,1993:137-175.
• [8] 余德运，杨军，赵明生.减震沟对台阶爆破地震波减震机理探讨[J].煤炭学报，2011,36(2):244-247.YU D Y,YANG J,ZHAO M S.Study on the absorption mechanism of damping bitch to the vibration wave in bench blasting[J].Journal of China Coal Society,2011,36(2):244-247.
• [9] 邵东辉.隧道掘进爆破下新浇二次衬砌的动力特性[J].工程爆破，2017,23(3):47-51,72.SHAO D H.Dynamic characteristics of new secondary lining under tunnel excavation blasting[J].Engineering Blasting,2017,23(3):47-51,72.
• [10] 龚曙光.ANSYS参数化编程与命令手册[M].北京：机械工业出版社，2009:78-109.GONG S G.ANSYS parametric programming and command manual[M].Beijing:Mechanical Industry Press,2009:78-109.