付艳恕;徐文;
FU Yan-shu;XU Wen;School of Mechanical & Electrical Engineering,Nanchang University;

• 1:南昌大学机电工程学院

摘要(Abstract)：

鉴于近年来接连发生数起恶性公交车起火事故,且事故具有突发性与发展快速性,提出利用聚能射流对起火后逃生通道进行开辟与扩充。然而,聚能射流触发后伴随一系列危害因素,可能给驾乘人员造成次生伤害。据此,利用ANSYS/LS-DYNA建立射流切割器数值分析模型,探索聚能装药爆轰产物超压与高温,并基于人体耐受能力评价其对驾乘人员的伤害。通过系列对比分析,获得适用于公交车起火逃生通道开辟与扩充的线型聚能射流设计参数,实现对驾乘人员近场次生灾害的抑制,以确保驾乘人员的安全,以期促进该方法在公交车起火防护中的应用。
In recent years,several buses had been caught fire viciously in major cities,and all the accidents happened suddenly and developed rapidly.The shaped charge jet was put forward as a countermeasure for the caught fire bus to open and enlarge the escape routes.However,a series of hazardous factors might bring some secondary disaster to drivers and passengers accompanied with detonation of shaped charge jet.In order to understand the overpressure and high temperature of the detonation products,the numerical model was established to simulate the behavior of the shaped charge jet.Then the potential dangerous for drivers and passengers were evaluated based on the physical resistance of human body.Through a series of comparative analysis,the parameters of a linear shaped charge jet suitable for caught fire bus escape routes were obtained.The secondary disaster were inhabited from near-field drivers and passengers to keep them safe.It was expected to promote the application of the method in protection of the caught fire bus.

关键词(KeyWords)： 聚能射流;公交车救援;逃生通道;次生危害;起火事故
Shaped charge jet;Bus rescue;Escape route;Secondary disaster;Fire accident

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金资助(11202093);; 江西省自然科学基金(20151BAB216022)

作者(Authors): 付艳恕;徐文;
FU Yan-shu;XU Wen;School of Mechanical & Electrical Engineering,Nanchang University;

参考文献(References)：

• [1]何文,钟志华,杨济匡.汽车安全气囊工作性能仿真试验验证技术研究[J].机械工程学报,2002,38(4):126-129.HE Wen,ZHONG Zhi-hua,YANG Ji-kuang.Research on the verification technology of automobile safety airbag[J].Chinese Journal of Mechanical Engineering,2002,38(4):126-129.
• [2]POTULA S R,SOLANKI K N,OGLESBY D L,et al.Investigation occupant safety through simulating the interaction between side curtain airbag deployment and an out-of-position occupant[J].Accident Analysis and Prevention,2012,49(6):392-403.
• [3]HALLMAN J J,NARAYAN Y,FRANK A P.Door velocity and occupant distance affect lateral thoracic injury mitigation with side airbag[J].Accident Analysis and Prevention,2011,43(3):829-839.
• [4]肖志,WISMANS J,蒋小晴,等.移动式安全座椅的乘员保护性能的研究[J].汽车工程,2011,33(7):603-607.XIAO Zhi,WISMANS J,JIANG Xiao-qing,et al.Astudy on occupant protection performance of moving safety seat[J].Vehicle Engineering,2011,33(7):603-607.
• [5]MATTHIEU L.Willingness to use safety belt and levels of injury in car accidents[J].Accident Analysis and Prevention,2008,40(3):1023-1032.
• [6]王宝兴,高强,张双计,等.大巴车玻璃柔性聚能切割技术的应用研究[J].工程爆破,2014,20(6):54-57.WANG Bao-xing,GAO Qiang,ZHANG Shuang-ji,et al.Application research of flexible shaped cutting technology in bus glass[J].Engineering Blasting,2014,20(6):54-57.
• [7]陈晨.客车侧围蒙皮涨拉工艺简析[J].商用汽车,2008(9):48-49.CHEN Cheng.An introduction of tensioning technology of side wall-skin for buses and coaches[J].Commercial Vehicle,2008(9):48-49.
• [8]石一丁.小型线型聚能切割器参数研究与设计[D].南京:南京理工大学,2006:33-36.SHI Yi-ding.Parameters of the mini-linear shaped cumulative cutter are studied and designed[D].Nanjing:Nanjing University of Science and Technology,2006:33-36.
• [9]陈寿峰,刘殿书,薛士文,等.水下爆破聚能药包设计与布设工艺[J].河北科技大学学报,2013,34(3):265-268.CHEN Shou-feng,LIU Dian-shu,XUE Shi-wen,et al.Shaped charge design and layout process for underwater blasting[J].Journal of Hebei Univerdity of Science and Technology,2013,34(3):265-268.
• [10]纪冲,龙源,杨旭,等.线性聚能切割器在工程爆破中的应用研究[J].爆破器材,2004,33(1):32-35.JI Chong,LONG Yuan,YANG XU,et al.The application research of linear shaped charge cutter in blasting[J].Explosive Materials,2004,33(1):32-35.
• [11]梁争峰,胡焕性,焦有东,等.间隔靶对射流侵彻能力影响极限的实验研究[J].火炸药学报,2003,26(1):12-15.LIANG Zheng-feng,HU Huan-xing,JIAO You-dong,et al.Experinental study on the ultimate adverse effect of the space between target plates on jet pentration depth[J].Chinese Journal of Explosives&Propellants,2003,26(1):12-15.
• [12]张凯,李晓杰.聚能线型切割器最佳张开角的理论分析[J].爆炸与冲击,1988,8(4):30-36.ZHANG Kai,LI Xiao-jie.Analysis of explosive cutter theory the optimal opening angle[J].Explosion and Shock Waves,1988,8(4):30-36.
• [13]BROWEN I G.Estimate of man`s to lerance to the direct effects of air blast,DASA-2113[C]//Washington,D.C.:Defense Atomic Support Agency Department of Defence,1988,8(4):316-322.
• [14]孙艳馥,王欣.爆炸冲击波对人体损伤与防护分析[J].火炸药学报,2008,31(4):50-53.SUN Yan-fu,WANG Xin.Analysis of human body in jury due to blast wave and protection method[J].Chinese Journal of Explosives&Propellants,2008,31(4):50-53.
• [15]卢业虎.高温液体环境下热防护服热湿传递与皮肤烧伤预测[D].上海:东华大学,2013:4-8.LU Ye-hu.Study on heat and mass transfer of thermal protective clothing and prediction of skin burn upon hot liquid splashes[D].Shanghai:Dong Hua University,2013:4-8.
• [16]王继海.二维不定常流与冲击波[M].北京:科学出版社,1994:492-501.WANG Ji-hai.Two-dimensional unsteady flow and shock wave[M].Beijing:Science Press,1994:492-501.