卞超;王凤英;卜杉杉;杨晓波;燕翔;
BIAN Chao;WANG Feng-ying;BU Shan-shan;YANG Xiao-bo;YAN Xiang;School of Chemical Engineering and Environment,North University of China;

• 1:中北大学化工与环境学院

摘要(Abstract)：

爆炸复合用炸药是影响爆炸焊接效果的最主要因素,不同的材料和工艺参数对炸药的爆速、比冲量和能量有不同的影响,其中炸药的密度直接影响复板斜碰撞基板的速度和角度。选用低合金高强度结构钢Q345B和工业纯钛TA2为实验材料,通过理论计算与实验研究,得到了一种较为适合钛-钢板爆炸焊接用的炸药配方,并对钛-钢爆炸焊接影响因素进行了探讨。
The most important factor which affected the explosive welding was the composite explosive.Different materials and process parameters had different influence on the detonation velocity,specific impulse and energy of explosive.The density of explosive directly affected the speed and angle of oblique collision between flyer plate and substrate.High strength-low alloy steel Q345 Band industrial pure titanium TA2 were chosen as experimental materials.The factors of explosive welding of titanium and steel were discussed and a preferable explosive formula was obtained through theoretical calculation and experiments.

关键词(KeyWords)： 爆炸焊接;基板;复板;爆轰参数;炸药配方;钛-钢板
Explosive welding;Substrate;Flyer plate;Detonation parameters;Explosive formula;Titanium-steel plate

Abstract:

Keywords:

基金项目(Foundation):

作者(Authors): 卞超;王凤英;卜杉杉;杨晓波;燕翔;
BIAN Chao;WANG Feng-ying;BU Shan-shan;YANG Xiao-bo;YAN Xiang;School of Chemical Engineering and Environment,North University of China;

参考文献(References)：

• [1]熊自立,张新华,刘永.金属爆炸焊接的原理和技术应用[J].中南工学院学报,1999,28(1):18-20.XIONG Zi-li,ZHANG Xin-hua,LIU Yong.Principle and technical application of metal explosive welding[J].Journal of Central-South Institute Technology,1999,28(1):18-20.
• [2]胡晓艳,沈兆武,刘天生,等.基体对高锰钢辙叉爆炸硬化效果的影响[J].工程爆破,2015,21(2):48-50.HU Xiao-yan,SHEN Zhao-wu,LIU Tian-sheng,et al.Influence of base on the effect of explosion hardening the high manganese steel frog[J].Engineering Blasting,2015,21(2):48-50.
• [3]BLAZYNSKI T Z.Explosive welding forming and compaction[M].London:Application Science Publishers Ltd.,1983,12(1):18-35.
• [4]VAIDDYANATHAN P V.Computer-aided design of explosive welding system[J].Materials Processing Technology,1993,38(1):501-516.
• [5]KRISHNAN J,KAKODKAR A,REDDY G P.An explosive investigation into tube to tube plate welding using the impactor method[J].Materials Processing Technology,1990,22(2):191-201.
• [6]李晓杰,杨文彬,奚进一,等.双金属爆炸焊接下限[J].爆破器材,1999,28(3):22-25.LI Xiao-jie,YANG Wen-bin,XI Jin-yi,et al.The lower limit of explosive welding parameter window for bimetal[J].Explosive Materials,1999,28(3):22-25.
• [7]曾正明.实用钢铁材料手册[M].2版.北京:机械工业出版社,2007:161-163.ZENG Zheng-ming.Practical steel material handbook[M].2nd edition.Beijing:Mechanical Industry Press,2007:161-163.
• [8]赵铮,王金相,航逸夫,等.双金属复合板爆炸焊接窗口研究[J].科学技术与工程,2009,9(5):1126-1129.ZHAO Zheng,WANG Jin-xiang,HANG Yi-fu,et al.Research on explosive welding window of bimetal composite plate[J].Science Technology and Engineering,2009,9(5):1126-1129.
• [9]张登霞,李国豪,周之洪,等.材料强度在爆炸焊接界面波形成过程中的作用[J].力学学报,1984,16(1):73-80.ZHANG Deng-xia,LI Guo-hao,ZHOU Zhi-hong,et al.Effect of material strength on forming process of explosive welding interface wave[J].Chinese Journal of Theoretical and Applied Mechanics,1984,16(1):73-80.
• [10]GODUNOV S K,DERIBAS A A,KOZIN N S.Wave formation in explosive welding[J].Journal of Applied Mechanics and Technical Physics,1971,12(3):398-406.