罗福友;周浩仓;陶明;张鑫;刘成敏;刘梅芳;王云茂;
LUO Fu-you;ZHOU Hao-cang;TAO Ming;ZHANG Xin;LIU Cheng-min;LIU Mei-fang;WANG Yun-mao;Jiangxi Cathay Pacific Wuzhou Blasting Engineering Co.,Ltd;JIangxi Guotai Industrial Explosive Group Co.,Ltd.;Jiangxi Blasting Engineering Technology Research Center;

• 1:江西国泰五洲爆破工程有限公司
• 2:江西国泰民爆集团股份有限公司
• 3:江西省爆破工程技术研究中心

摘要(Abstract)：

为有效降低楼房爆破拆除塌落振动对周边设施的影响,提出一种基于剪切破碎和挤压冲击原理的分块斜线起爆网路。该网路是在楼房的空间上将横向、纵向和垂向划分为若干个区域,区域间前后、左右和上下分别设计延时时间,使得楼房在爆破过程中实现空中扭曲、拉扯和剪切,立柱、梁和楼板弯曲变形,先后受到剪切、挤压和冲击破坏而充分解体,降低塌落振动。将分块斜线起爆网路试用于江西省原省政府建设大厦拆除爆破中,成功地完成了建设大厦拆除爆破工程,取得了良好效果。经振动检测和爆堆实测结果得知,通过"时差"和"高差"使楼房分跨依次起爆触地,解体充分,爆破振动和塌落振动降低效果明显。该网路值得推广使用。
In order to reduce the effects of building blasting demolition vibration on surrounding facilities,a block oblique line firing circuit is presented based on the principle of extrusion and impact.The firing circuit is divided into several regions on the floor of the building horizontally,vertically and vertically.Difference time delay is designed in the area of front and back,left and right,and up and down.This allows the building to achieve air twisting,pulling and shearing during the blasting.This can make the column,beam and slab bending deformation,shearing,compression and impact have been destroyed and disintegrated fully,reduce the collapse vibration.The block oblique line firing circuit is applied to the blasting demolition project of the Jianshe Building of the former provincial government of Jiangxi Province.The demolition blasting project of the building is successfully completed and good results are achieved.The vibration detection and the muck piles actual measured results show that through the "time difference" and " height difference",the buildings are separated in succession to detonate the touchdown,disintegrated fully,blasting vibration and collapse vibration reduction effect is obvious,the regions oblique line firing circuit is worth popularizing.

关键词(KeyWords)： 拆除爆破;起爆网路;塌落振动;楼房拆除;斜线起爆
demolition blasting;firing circuit;collapse vibration;building demolition;oblique initiation

Abstract:

Keywords:

基金项目(Foundation): 江西省科技厅科技平台和基地建设资助项目(20164BCD40054)

作者(Authors): 罗福友;周浩仓;陶明;张鑫;刘成敏;刘梅芳;王云茂;
LUO Fu-you;ZHOU Hao-cang;TAO Ming;ZHANG Xin;LIU Cheng-min;LIU Mei-fang;WANG Yun-mao;Jiangxi Cathay Pacific Wuzhou Blasting Engineering Co.,Ltd;JIangxi Guotai Industrial Explosive Group Co.,Ltd.;Jiangxi Blasting Engineering Technology Research Center;

参考文献(References)：

• [1]刘国军,张海龙,赵存清.复杂环境下“L”型框架楼房定向爆破拆除[J].爆破,2016,33(1):93-95,136.LIU G J,ZHANG H L,ZHAO C Q.Explosive directional demolition of“L”-shaped frame building in complex environment[J].Blasting,2016,33(1):93-95,136.
• [2]徐鹏飞,张英才,贾海鹏,等.复杂环境下15层框架楼房控制爆破拆除[J].工程爆破,2015,21(5):32-36.XU P F,ZHANG Y C,JIA H P,et al.Controlled blasting demolition of a 15-storey frame building in complicated environment[J].Engineering Blasting,2015,21(5):32-36.
• [3]费鸿禄,刘志东,戴明颖.复杂环境下10层非对称框架结构楼房定向爆破拆除[J].爆破,2015,32(2):89-94.FEI H L,LIU Z D,DAI M Y.Directional explosive demolition of ten-storey dissymmetry building in complicated situation[J].Blasting,2015,32(2):89-94.
• [4]崔正荣,赵翔.框架楼房原地坍塌爆破拆除模拟与优化[J].爆破,2014,31(2):100-103.CUI Z R,ZHAO X.Simulation and optimization of explosive demolition of frame structure collapse in situ[J].Blasting,2014,31(2):100-103.
• [5]齐世福,刘好全,李宾利,等.框剪结构高楼纵向倾倒拆除爆破研究[J].爆破器材,2014,43(3):41-47.QI S F,LIU H Q,LI B L,et al.Blasting study on the lengthwise collapse of a tall building with a frame shear wall structure[J].Explosive Materials,2014,43(3):41-47.
• [6]言志信,于换小,朱辉.框架结构爆破拆除过程研究[J].爆破,2012,29(4):19-22,27.YAN Z X,YU H X,ZHU H.Research on explosive demolition process of frame structure[J].Blasting,2012,29(4):19-22,27.
• [7]赵明生,池恩安,王丹丹,等.茅台酒厂26层剪力墙结构大楼爆破拆除[J].工程爆破,2015,21(3):41-45.ZHAO M S,CHI E A,WANG D D,et al.Blasting demolition of a 26-storey shear wall structure building in Moutai distillery[J].Engineering Blasting,2015,21(3):41-45.
• [8]齐世福,夏裕帅,谢兴博,等.复杂环境下高大楼房控制爆破技术[J].工程爆破,2015,21(1):20-24.QI S F,XIA Y S,XIE X B,et al.The controlled blasting technique for demolishing a high building in complicated surrounding[J].Engineering Blasting,2015,21(1):20-24.
• [9]张世平,阎晋文.爆破拆除高大建筑物产生的震动危害与减震方法[J].太原理工大学学报,2006(6):685-687,702.ZHANG S P,YAN J W.Harm of the seism vibration in the high-building blasting demolition and method of damping vibration[J].Journal of Taiyuan University of Technology,2006(6):685-687,702.
• [10]谢先启.精细爆破发展现状及展望[J].中国工程科学,2014,16(11):14-19.XIE X Q.Precision blasting,current status and its prospective[J].Engineering Sciences,2014,16(11):14-19.
• [11]叶洲元,马建军.爆破拆除高耸建筑物触地危害分析与控制[J].中国安全科学学报,2010,20(2):150-154,181.YE Z Y,MA J J.Harm analysis of collapse and touchdown of tower buildings in demolition blasting and its control measures[J].China Safety Science Journal,2010,20(2):150-154,181.
• [12]周家汉.爆破拆除塌落振动速度计算公式的讨论[J].工程爆破,2009,15(1):1-4,40.ZHOU J H.Discussion on calculation formula of collapsing vibration velocity caused by blasting demolition[J].Engineering Blasting,2009,15(1):1-4,40.
• [13]魏挺峰,魏晓林,傅建秋.减少框架爆破拆除后坐的措施(2)[J].爆破,2009,26(3):32-37,65.WEI T F,WEI X L,FU J Q.Measures for reducing back ward action in explosive demolition of frame structure(2)[J].Blasting,2009,26(3):32-37,65.
• [14]魏挺峰,魏晓林,傅建秋.框架和排架爆破拆除的后坐(1)[J].爆破,2008,25(2):12-18.WEI T F,WEI X L,FU J Q.Back sitting of frame at framed bent demolished by blasting(1)[J].Blasting,2008,25(2):12-18.
• [15]胡浩川,池恩安,乐松,等.建筑物爆破拆除倒塌失败原因分析[J].爆破,2010,27(2):99-102.HU H C,CHI E A,LE S,et al.Analysis of collapse failure of building explosive demolition[J].Blasting,2010,27(2):99-102.
• [16]郑德明,余德运,曹跃,等.合肥17层高楼原地坍塌拆除爆破[J].爆破,2006,23(1):48-51.ZHENG D M,YU D Y,CAO Y,et al.Demolition of a17-storeyed building by in-site blasting[J].Blasting,2006,23(1):48-51.
• [17]汪旭光.爆破设计与施工[M].北京:冶金工业出版社,2015:393-394.WANG X G.Blasting design andconstruction[M].Beijing:Metallurgical Industry Press,2015:393-394.
• [18]何晓成.多层建筑物爆破拆除倒塌过程模拟研究[D].哈尔滨:中国地震局工程力学研究所,2016.HE X C.Simulation study on the collapse process of multi-story building demolition blasting[D].Harbin:Institute of Engineering Mechanics,China Earthquake Administration,2016.
• [19]刘殿书.中国爆破新技术Ⅱ[M].北京:冶金工业出版社,2008.LIU D S.New blasting technology in China II[M].Beijing:Metallurgical Industry Press,2008.