葛勇;付天光;杨智广;戴显超;
GE Yong1,FU Tian-guang1,YANG Zhi-guang1,DAI Xian-chao2(1.The Engineering Blasting Institute of Liaoning Technical University,Fuxin 123000,Liaoning,China;2.Fuxin Public Security Bureau,Fuxin 123000,Liaoning,China)

• 1:辽宁工程技术大学工程爆破研究所
• 2:辽宁工程技术大学工程爆破研究所
• 3:辽宁工程技术大学工程爆破研究所
• 4:阜新市公安局 辽宁阜新123000

摘要(Abstract)：

根据本次要销毁的炮弹壁较厚等特点,经方案对比与论证,选用了线性聚能切割器对其进行爆炸销毁。本文介绍了线性聚能切割器参数设计的依据,切割器外形、药型罩以及炸药种类的选择,零炸高的实现,以及起爆网路、安全警戒及安全距离的计算;同时,阐述了利用聚能切割技术销毁废旧炮弹的效果和体会。
Regarding the relative thick wall of the mines and shells to be destroyed in this time,the cutting blasting technology with linear shaped charging was finally determined to be responsible for the destroying after comparisons of some blasting programs.This paper introduced the foundation of design of the linear shaped charging parameter,the figuration of the cutter,the explosive type cover,the choice of explosive type,the realization of Zero-explosive height,the ignition network,and the calculation of safety distance as well as the security guarding measures.As a summary the paper discussed the effect and the experience of destroying mines and shells by cutting blasting technology with the linear shaped charging.

关键词(KeyWords)： 聚能切割器;零炸高;切割爆破
Shaped-charge;Zero-explosive height;Cutting blasting

Abstract:

Keywords:

基金项目(Foundation):

作者(Authors): 葛勇;付天光;杨智广;戴显超;
GE Yong1,FU Tian-guang1,YANG Zhi-guang1,DAI Xian-chao2(1.The Engineering Blasting Institute of Liaoning Technical University,Fuxin 123000,Liaoning,China;2.Fuxin Public Security Bureau,Fuxin 123000,Liaoning,China)

参考文献(References)：

• [1]刘殿中.工程爆破实用手册[M].北京:冶金工业出版社,1999.
• [2]陈华腾,钮强,向以信.拆除控制爆破技巧[M].沈阳:辽宁科学技术出版社,1995.
• [3]商健,顾文彬,吴腾芳,等.销毁大口径弹药用线性切割器的设计[J].爆破,1997(4):80-85.
• [4]章克凌,徐春.航、炮弹销毁的安全距离计算[J].爆破,2003(4):24-26.
• [5]杨军,苏平,李萍丰.诱爆销毁废旧炮(航)弹的爆破设计及组织实施[J].工程爆破,2005,11(4):83-87.
• [6]袁绍国,张富贵,张培瑞,等.包头市废旧雷弹的爆破销毁[J].工程爆破,2000(4):87-90.
• [7]费鸿禄,付天光.线型聚能切割器的试验研究与应用[J].爆破器材,2003,32(5):28-31.
• [8]付天光,费鸿禄,段宝福.桁架结构厂房房顶聚能切割爆破拆除[J].工程爆破,2004(2):35-37.