续新宇;易建政;朱剑;刘国元;
XU Xin-yu1,YI Jian-zheng1,ZHU Jian2,LIU Guo-yuan3(1.Institute of Electrostatic & Electromagnetic Protection,Ordnance Engineering College,Shijiazhuang 050003,China;2.Unit 73909,Xuzhou,221004 Jiangsu,China;3.Unit 78465,Guangyuan 628000,Sichuan,China)

• 1:军械工程学院静电与电磁防护研究所
• 2:军械工程学院静电与电磁防护研究所
• 3:73909部队
• 4:78465部队 石家庄050003

摘要(Abstract)：

EFP侵彻非均匀介质,相比聚能射流具有很多优点。本文在对比研究聚能射流和EFP形成及作用过程的基础上,结合实际对EFP装药进行整体结构设计。基于此结构,利用LS-DYNA程序对EFP成型过程及其速度、能量进行三维数值模拟,然后采用一种工程算法进行理论解析,两者对比检验设计结果的合理性。结论对于EFP装药的结构设计和工程应用具有一定的参考价值。
Explosively Formed Projectile(EFP)applies to penetrating nonuniform medium with lots of advantages.Based on the comparison between metal jet and EFP,the typical shaped charge is designed in this paper.To test and verify effect of this EFP design,the processes of EFP formation,velocity and kinetic energy are numerically simulated with LS-DYNA3D finite element code.The results from the theoretical analysis are in good agreement with unmerical simulation.It provides an important reference for optimization of EFP design,and is valuable for its engineering application.

关键词(KeyWords)： EFP;结构设计;数值模拟
EFP;Structrure design;Numerical simulation

Abstract:

Keywords:

基金项目(Foundation):

作者(Authors): 续新宇;易建政;朱剑;刘国元;
XU Xin-yu1,YI Jian-zheng1,ZHU Jian2,LIU Guo-yuan3(1.Institute of Electrostatic & Electromagnetic Protection,Ordnance Engineering College,Shijiazhuang 050003,China;2.Unit 73909,Xuzhou,221004 Jiangsu,China;3.Unit 78465,Guangyuan 628000,Sichuan,China)

参考文献(References)：

• (1)隋树元,王树山.终点效应学[M].北京:国防工业出版社,2000.
• (2)威廉.普.沃尔特斯,乔纳斯.埃.朱卡斯.成型装药原理及其应用[M].王树魁,贝静芬等译.北京:兵器工业出版社,1992.
• (3)蒋建伟,杨军,门建兵,等.结构参数对EFP成型影响的数值模拟[J].北京理工大学学报,2004,24(11):939-941.
• (4)周栋,王志军,吴国栋.曲率半径和壁厚对EFP成形性能的影响[J].华北工学院学报,2004,25(1)39-42.
• (5)Richard F,Jeffrey K,William N G,et al.Advances innon-tantalum EFP warhead designs[C].The proceedingsof the 21stinternational symposium on ballistics,2004:721-727.
• (6)江厚满.爆炸成型弹丸优化设计及相关问题研究[D].长沙:国防科学技术大学,1999.
• (7)李必,鲁艳红,陈寿如,等.基于瞬时爆轰的成型速度的分析及应用研究[J].采矿技术,2005(3):87-89.