何贤辉;姚丹;张正忠;胡龙飞;宋志伟;
HE Xian-hui;YAO Dan;ZHANG Zheng-zhong;HU Long-fei;SONG Zhi-wei;Zhejiang Gaoneng Corporation of Blasting Engineering Co.,Ltd.;

• 1:浙江省高能爆破工程有限公司

摘要(Abstract)：

为解决某钢铁厂高炉内炉瘤堆积问题,通过爆破方案的选择和爆破参数的计算,确定采用高温氧割烧孔的钻孔爆破法和滑轮吊装药包裸露外敷接触爆破法,同时对爆破振动、飞石及爆炸冲击波进行计算分析,提出相应的爆破安全防护措施,最终利用强制通风、高温冷却、药包隔热等多种辅助手段,在不停炉情况下完成了高温炉瘤的爆破拆除。爆破后,通过对炉壁外侧的红外线探测以及人工观测获知,炉瘤清除较为彻底,爆破效果良好。实践表明,滑轮吊装药包裸露外敷接触及钻孔爆破法可有效去除各类炉瘤,大幅提高除瘤效率与施工安全,改善高炉生产能力,可为解决同类工程难题提供参考。
In order to solve the problem of the lump accumulation in blast furnace stove of a steel plant,through selection of blasting scheme and the calculation of blasting parameters,drill blasting method with high-temperature oxygen-cutting and adobe external contacting are used.At the same time,after calculation and analysis of blasting vibration,flying rocks and shock wave of explosion are done,the corresponding protective blasting measures are put forward.Finally,Through methods like forced ventilation,high temperature cooling,heat-insulated cartridge,demolition of high-temperature furnace lump is done without stop.Afterwards,through the infrared detection and artificial observation to the lateral of furnace wall,it comes out that the removal of furnace accretion is relatively complete.Practice indicates that furnace lump can be effectively and safely removed by means of pulley hoisting cartridge and drilling method.In this case,the problem of furnace lump is effectively solved and the producing ability of blast furnace is also improved.This paper can provide references for similar projects as well.

关键词(KeyWords)： 高温炉瘤;拆除爆破;安全控制;裸露药包;钻孔爆破法
Furnace lump under high temperature;Demolition blasting;Security control;Adobe;Drill blasting method

Abstract:

Keywords:

基金项目(Foundation):

作者(Authors): 何贤辉;姚丹;张正忠;胡龙飞;宋志伟;
HE Xian-hui;YAO Dan;ZHANG Zheng-zhong;HU Long-fei;SONG Zhi-wei;Zhejiang Gaoneng Corporation of Blasting Engineering Co.,Ltd.;

参考文献(References)：

• [1]王剑,钟永晓.炼铁高炉高温炉瘤爆破清除实践[J].爆破,2010,27(3):81-82.WANG Jian,ZHONG Yong-xiao.Explosive demolition of accretion in smelting iron furnace[J].Blasting,2010,27(3):81-82.
• [2]陈培义.韶关冶炼厂炉结爆破新工艺[J].工程爆破,2009,15(2):79-81.CHEN Pei-yi.New blasting technique of furnace clinker removal in Shaoguan smelter[J].Engineering Blasting,2009,15(2):79-81.
• [3]范志强,沈兆武,蒋耀港.混铁炉炉底残留物爆破切割技术及炉壁致裂分析[J].工程爆破,2013,19(4):42-45.FAN Zhi-qiang,SHEN Zhao-wu,JIANG Yao-gang.Ablasting technology for cutting of slagat the bottom of metal mixer and analysis on the fracture of mixer wall[J].Engineering Blasting,2013,19(4):42-45.
• [4]蔡建德.露天煤矿高温区爆破安全作业技术研究[J].工程爆破,2013,19(1-2):92-95.CAI Jian-de.Security technology of high-temperature blasting in open pit coal mine[J].Engineering Blasting,2013,19(1-2):92-95.
• [5]于亚伦.工程爆破理论与技术[M].北京:冶金工业出版社,2007:390-419.YU Ya-lun.Engineering blasting theory and technology[M].Beijing:Metallurgical Industry Press,2007:390-419.
• [6]倪嘉滢.炽热体爆破的具体应用[J].西部探矿工程,2014,26(2):179-180.NI Jia-ying.The specific application of fire explosion[J].West-China Exploration Engineering,2014,26(2):179-180.
• [7]杨译,申荣光,刘代光,等.高温磷炉炉瘤爆破施工与安全控制[J].工程爆破,2010,16(4):70-72.YANG Yi,SHEN Rong-guang,LIU Dai-guang,et al.Blasting construction and safety control of phosphorus furnace accertion in high temperature[J].Engineering Blasting,2010,16(4):70-72.
• [8]廖跃华,龙源,黄龙华.大型炼铁高炉炉结的高温控制爆破技术研究[J].工程爆破,2011,17(3):88-91.LIAO Yue-hua,LONG Yuan,HUANG Long-hua.Study on high temperature controlled blasting technology for accretion of large iron making furnace[J].Engineering Blasting,2011,17(3):88-91.
• [9]刘殿中,杨世春.工程爆破实用手册[M].北京:冶金工业出版社,2003.LIU Dian-zhong,YANG Shi-chun.Practical manual of engineering blasting[M].Beijing:Metallurgical Industry Press,2003.