黄增泽
HUANG Zeng-ze (China Society of Engineering Blasting,Beijing 100044,China)

• 1:中国工程爆破协会 北京100044

摘要(Abstract)：

简要介绍了两起火灾事故。根据现场勘察和深入分析 ,认为轮碾机长时间空转 ,碾砣与碾盘直接摩擦生热而引燃残药 ,是轮碾机着火的真正原因 ;而炸药包装材料被炸药爆炸时产生的高温引燃并被冲击波抛出 ,是试验场附近的植被着火的直接原因。为避免今后类似事故的发生 ,提出了相应的防范措施 ,强调了完善规章制度和加强管理的重要性。
Two fire accidents are introduced On basis of the investigation on the scene and the deep-going analysis,the real cause of wheel roller fire is that the explosive remained in mill is ignited by the heat from direct friction of roller to pan due to idle run for long time while the direct cause of vegetation fire is that the pack material of explosive is ignited by the high temperature and thrown out by shock wave from explosive detonation In order to avoid the similar accidents,the relative countermeasures are presented and the importance of improving regularities and strengthening management is stressed

关键词(KeyWords)： 轮碾机;炸药燃烧;火灾事故;爆破安全
Wheel roller;Explosive inflammation; Fire accident; Blasting safety

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 黄增泽
HUANG Zeng-ze (China Society of Engineering Blasting,Beijing 100044,China)

参考文献(References)：

• 〔1〕吕春绪,刘祖亮,仉欧琪工业炸药[M ]北京:兵器工业出版社,1994,80-83
• 〔2〕陈万里木粉干燥过程的数学模型及分析方法[J]爆破器材,2003,32(3):10-13
• 〔3〕爆破安全规程GB6722-86