高温炮孔爆破的安全处理探讨DISCUSSION ON THE SAFE DISPOSAL OF THE HIGH TEMPERATURE HOLE BLASTING
张杰;郝新民;马伟;赵剑;
ZHANG Jie,HAO Xin-min,MA Wei,ZHAO Jian(Inner Mongolia Shengli Resources Group Hongqi Chemical Co.,Ltd.,Hohhot 011600,China)
摘要(Abstract)：
煤矿高温炮孔一直是煤矿露天爆破工程的重点和难点。通过介绍火区高温炮孔分类及处理方法,归纳了几种降温灭火技术,并对爆破器材的选取提出了一些看法。坚持科学化管理,严格遵守爆破作业规程,处理好高温炮孔爆破作业是完全可行的。
The high temperature holes of coal mine have been an important and difficult point in surface blasting project.Some processing methods and classification of high temperature holes in the fire area were introduced,several treatments were summarized to lower the temperature and put out the fire.Some views on the selection of explosive materials were put forward.If the mine adhered to scientific management and complying the operation regulations for blasting strictly,it was obviously feasible to solve the blasting of high temperature hole.
关键词(KeyWords)：
高温炮孔;露天爆破;爆破器材;科学化管理
High temperature hole;Surface blasting;Explosive material;Scientific management
基金项目(Foundation):
作者(Authors):
张杰;郝新民;马伟;赵剑;
ZHANG Jie,HAO Xin-min,MA Wei,ZHAO Jian(Inner Mongolia Shengli Resources Group Hongqi Chemical Co.,Ltd.,Hohhot 011600,China)
参考文献(References)：
- (1)王明全.非接触隐蔽火源探测技术使用手册[M].北京:中国科技文化出版社,2005.
- (2)吴海.乌达煤田灭火方法简述[J].内蒙古煤炭经济,2008(3):28-30.
- (3)傅建秋,李战军,蔡建德,等.胶状乳化炸药和电雷管的耐高温性能试验研究[J].爆破,2008,25(3):4-10.
- (4)吕春绪,刘祖亮,陆明,等.工业炸药理论[M].北京:兵器工业出版社,2003.
- (5)陈寿如,柳健康,史秀志,等.高温控制爆破中新型隔热材料的试验研究[J].爆破器材,2002,31(5):32-34.
- (6)中华人民共和国国家标准.爆破安全规程(GB6722-2003)[S].北京:中国标准出版社,2004.