切缝药包爆破裂纹扩展机理研究STUDY ON MECHANISM OF CRACK GROWTH OF CUTTING SEAM CARTRIDGE BLASTING
张志雄,郭银领,李林峰
ZHANG Zhi-xiong,GUO Yin-ling,LI Lin-feng(Faculty of Land Resource Engineering
摘要(Abstract):
基于爆炸力学、断裂力学理论,对切缝药包爆破中的切缝的产生及裂纹起裂、扩展进行了研究。通过实验室模型试验研究切缝外壳参数、不耦合系数对裂纹定向扩展的影响,现场初步试验验证了爆破参数设计的合理性。最后提出了该技术在工程实践中仍存在的问题。
Basing on explosion mechanics and fracture mechanics,a certain analysis was carried out on crackle split,crackle extending,and the cutting seam produced from the explosion of cutting seam cartridge.The influences of the parameter of cutting seam cowl and the decoupling coefficient to oriented crackle extending were researched by testing the laboratory model experiment.Primary test on site validated the rationality of designed blasting parameter.However,the paper also pointed out the problems of this technology in engineering application.
关键词(KeyWords):
切缝药包;应力强度因子;不耦合系数;应变比例
Cutting seam cartridge;Stress-intensity factor;Decouple coefficient;Proportion of strain value
基金项目(Foundation):
作者(Author):
张志雄,郭银领,李林峰
ZHANG Zhi-xiong,GUO Yin-ling,LI Lin-feng(Faculty of Land Resource Engineering
参考文献(References):
- [1]张志呈.定向断裂控制爆破[M].重庆:重庆出版社,2000.
- [2]徐颖,宗琦.光面爆破软垫层装药结构参数理论分析[J].煤炭学报.2000,25(6):610-614.
- [3]王树仁,魏有志.岩石爆破中断裂控制的研究[J].中国矿业学院学报.1985(3):113-120.
- [4]唐中华,张志呈,向开伟,等.切缝药包爆破的作用机理[J].云南冶金.1998,27(4):7-11.
- [5]李彦涛,杨永琦,成旭.切缝药包爆破模型及生产试验研究[J].辽宁工程技术大学学报,2000,19(2):116-118.
- [6]张玉明,张奇,白春华.切缝药包成缝机理及参数优化[J].煤炭科学技术.2001,29(12):32-35.
- [7]高金石,张继春.半圆套管在定向成缝爆破中的作用分析[J].爆破,1990(4):21-24.
- [8]蒲传金,张志呈,郭学彬,肖正学.切缝药包爆破的研究现状和存在的问题[J].四川冶金.2006,28(40):1-5.
- 切缝药包
- 应力强度因子
- 不耦合系数
- 应变比例
Cutting seam cartridge - Stress-intensity factor
- Decouple coefficient
- Proportion of strain value