李鹏
LI Peng

• 1:哈尔滨恒冠爆破工程有限公司

摘要(Abstract)：

对超千米深水井进行了洗井、增水爆破,有效地解决了深水井出水量不足的难题。介绍了炸药、起爆器材的选择和使用,以及装药结构、网路设计、聚能装药等技术措施,可为类似爆破工程提供借鉴和参考。
Flushing and water increase by blasting technology were conducted on the over 1000 m water well,which effectively solved the lack of deep well water yield problem.Selection and usage of the explosive and initiating device were introduced,and technical measures included charge configuration,network design,shaped charge were introduced also,which can provide a reference for the similar blasting engineering.

关键词(KeyWords)： 深水井爆破;高能炸药;线型聚能装药;熔铸装药;玻璃钢防水;减压阻热
Deep water increase blasting;High explosive;Linear shaped charge;Fused cast charge;Glass fiber reinforced plastic waterproof;Heat stress resistance

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 李鹏
LI Peng

参考文献(References)：

• [1]夏常青,李玉岭,周俊珍,等.爆破[M].长沙:中国人民解放军长沙工程兵学院出版社,1988:255.
• [2]金韶华,松全才.炸药理论[M].西安:西北工业大学出版社,2010.
• [3]孙业斌.军用混合炸药[M].北京:兵器工业出版社,1995.
• [4]陈熙荣.炸药性能与装药工艺[M].北京:国防工业出版社,1988.
• [5]汪旭光.爆破设计与施工[M].北京:冶金工业出版社,2011:535-555.
• [6]于亚伦.工程爆破理论与技术[M].北京:冶金工业出版社,2007:381-389.
• [7]吴金仓.深水海底沟槽爆破开挖技术[J].工程爆破,2010,16(4):44-46.
• [8]朱京武,郑晓宁,吴金仓,等.水下裸露爆破清障及测试分析[J].工程爆破,2010,16(4):84-86.