黄鹏波;张怀智;谢全民;龙源;郭涛;
HUANG Peng-bo;ZHANG Huai-zhi;XIE Quan-min;LONG Yuan;GUO Tao;Wuhan Ordnance N.C.O Academy of PLA;University of Science & Technology of PLA;

• 1:武汉军械士官学校
• 2:解放军理工大学

摘要(Abstract)：

在分析国内常用弹药销毁方法优缺点的基础上,分别简要介绍了近年来新兴的聚能切割、射孔弹、爆炸装置摧毁器、高热剂、导爆索切割、磨料水射流切割和高压液氮低温切割等弹药销毁领域的几种新技术,对国内废弃常规弹药销毁工作具有一定的参考价值。
Firstly,advantages and disadvantages for destruction methods of common ammunition were analyzed,and then several new techniques in the field of ammunition destruction such as shaped charge cut- ting,perforating charge,destroying machine of explosive device,thermite,detonating cord cutting,abra- sive water jet cutting and high pressure nitrogen cryogenic cutting were introduced.It could provide a ref- erence for the destruction of abandoned conventional ammunition.

关键词(KeyWords)： 废弃常规弹药;销毁;切割
Rejected conventional ammunition;Destruction;Cutting

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 黄鹏波;张怀智;谢全民;龙源;郭涛;
HUANG Peng-bo;ZHANG Huai-zhi;XIE Quan-min;LONG Yuan;GUO Tao;Wuhan Ordnance N.C.O Academy of PLA;University of Science & Technology of PLA;

Email:

DOI:

参考文献(References)：

• [1]娄建武,龙源,谢兴博.废弃火炸药和常规弹药的处置与销毁技术[M].北京:国防工业出版社,2007.
• [2]GJB 5427-2005报废通用弹药处理技术规程[S].北京:总装备部军标出版发行部,2005.
• [3]崔军,徐峰,李向荣.聚能射流对靶板侵彻的数值仿真[J].兵工自动化,2010,29(1):24-26.
• [4]朱爱华.用导爆索和射孔弹销毁废旧军事弹药[J].爆破,2004,21(3):75-76.
• [5]易建坤,贺五一,吴腾芳,等.高热剂在弹药销毁领域应用初探[J].工程爆破,2004,10(4):21-25.
• [6]钟明寿,龙源,陈圣波,等.报废防坦克地雷销毁处理安全技术研究[J].工兵装备研究,2007,26(6):53-56.
• [7]钟明寿,龙源,孙远征,等.导爆索爆炸拆分废弃常规弹药的初步试验研究[J].爆破器材,2008,37(2):31-34.
• [8]刘鹏,张怀智,金昌根,等.废旧弹药爆破销毁技术综述[J].工程爆破,2011,17(1):86-89.
• [9]张庆良.水射流技术及其应用[J].液压与气动,2012(3):71-72.
• ①张怀智.报废通用弹药处理技术[M].武汉:军械士官学校,2006.